modelAntiFreeze
Example for usage of antifreeze model
Extends from BaseClasses.PartialSafety, Modelica.Icons.Example (Icon for runnable examples).
Information
This example shows the usage of the model Buildings.Fluid.HeatPumps.ModularReversible.Controls.Safety.AntiFreeze.
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Fluid.HeatPumps.ModularReversible.BaseClasses.RefrigerantMachineControlBus | sigBus (from PartialSafety) | Bus-connector for the heat pump | |
| Modelica.Blocks.Interfaces.RealOutput | ySet (from PartialSafety) | Relative speed of compressor from 0 to 1 | |
| Modelica.Blocks.Interfaces.RealOutput | yOut (from PartialSafety) | Relative speed of compressor applied after safety control |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Logical.Hysteresis | hys (from PartialSafety) | Check if onOffMea in heat pump model would be true | |
| Buildings.Fluid.HeatPumps.ModularReversible.Controls.Safety.AntiFreeze | antFre | Safety control for antifreeze | |
| Modelica.Blocks.Sources.Pulse | ySetPul | Pulse signal for ySet | |
| Modelica.Blocks.Sources.Pulse | TConInEmu | Emulator for condenser inlet temperature | |
| Modelica.Blocks.Sources.Pulse | TEvaOutEmu | Emulator for evaporator outlet temperature | |
| Modelica.Blocks.Logical.Hysteresis | ySetOn | =true if device is set on after on off control | |
| Modelica.Blocks.Sources.Constant | conZer | Constant zero | |
| Modelica.Blocks.Logical.Switch | swiErr | Switches to zero when an error occurs |
Revisions
-
October 2, 2022 by Fabian Wuellhorst:
First implementation (see issue #1576)