modelCarnot_TCon_etaPL

Test model for the part load efficiency curve with condenser leaving temperature as input signal

Extends from Examples.Carnot_TCon (Test model for heat pump based on Carnot efficiency and condenser outlet temperature control signal).

Information

This example extends from Buildings.Fluid.HeatPumps.Examples.Carnot_TCon but has a part load efficiency that varies with the load.

Type	Name	Default	Description
Modelica.Units.SI.TemperatureDifference	dTEva_nominal (from Carnot_TCon)	-5	Temperature difference evaporator inlet-outlet
Modelica.Units.SI.TemperatureDifference	dTCon_nominal (from Carnot_TCon)	10	Temperature difference condenser outlet-inlet
Modelica.Units.SI.HeatFlowRate	QCon_flow_nominal (from Carnot_TCon)	100E3	Evaporator heat flow rate
Modelica.Units.SI.MassFlowRate	m1_flow_nominal (from Carnot_TCon)	QCon_flow_nominal/dTCon_nominal/4200	Nominal mass flow rate at condenser
Modelica.Units.SI.SpecificHeatCapacity	cp2_default (from Carnot_TCon)	Medium2.specificHeatCapacityCp(Medium2.setState_pTX(Medium2.p_default, Medium2.T_default, Medium2.X_default))	Specific heat capacity of medium 2 at default medium state

Type	Name	Description
Buildings.Fluid.HeatPumps.Carnot_TCon	heaPum (from Carnot_TCon)	Heat pump
Buildings.Fluid.Sources.MassFlowSource_T	sou1 (from Carnot_TCon)
Buildings.Fluid.Sources.MassFlowSource_T	sou2 (from Carnot_TCon)
Modelica.Blocks.Sources.Ramp	TConLvg (from Carnot_TCon)	Control signal for condenser leaving temperature
Modelica.Blocks.Math.Gain	mEva_flow (from Carnot_TCon)	Evaporator mass flow rate
Modelica.Blocks.Math.Add	QEva_flow (from Carnot_TCon)	Evaporator heat flow rate
Buildings.Fluid.Sources.Boundary_pT	sin2 (from Carnot_TCon)
Buildings.Fluid.Sources.Boundary_pT	sin1 (from Carnot_TCon)