modelComparePower
Base class for validation models that compare power estimation methods
Information
This is the base class for a number of validation models that compare power computation of different mover model configurations.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Fluid.Movers.Data.Generic | per | ||
| Modelica.Units.SI.MassFlowRate | m_flow_nominal | per.peak.V_flow*rho_default | Nominal mass flow rate |
| Modelica.Units.SI.PressureDifference | dp_nominal | per.peak.dp | Nominal pressure drop |
| Modelica.Units.SI.Density | rho_default | Medium.density_pTX(p = Medium.p_default, T = Medium.T_default, X = Medium.X_default) | Default medium density |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Fluid.Movers.BaseClasses.PartialFlowMachine | mov1 | ||
| Buildings.Fluid.Movers.BaseClasses.PartialFlowMachine | mov2 | ||
| Buildings.Fluid.Movers.BaseClasses.PartialFlowMachine | mov3 | ||
| Buildings.Fluid.Actuators.Dampers.Exponential | damExp1 | Damper | |
| Buildings.Fluid.Actuators.Dampers.Exponential | damExp2 | Damper | |
| Buildings.Fluid.Actuators.Dampers.Exponential | damExp3 | Damper | |
| Buildings.Fluid.Sources.Boundary_pT | sou | Source | |
| Buildings.Fluid.Sources.Boundary_pT | sin | Sink | |
| Modelica.Blocks.Sources.Ramp | ramSpe | Ramp signal for mover speed | |
| Modelica.Blocks.Sources.Ramp | ramDam | Ramp signal for damper position |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |
Revisions
-
May 15, 2024, by Hongxiang Fu:
First implementation. This is for IBPSA, #1880.