packageSources

Information

Package Sources contains generic sources for fluid connectors to define fixed or prescribed ambient conditions.

Contents

Name	Description
Boundary_pT	Boundary with prescribed pressure, temperature, composition and trace substances
Boundary_ph	Boundary with prescribed pressure, specific enthalpy, composition and trace substances
MassFlowSource_T	Ideal flow source that produces a prescribed mass flow with prescribed temperature, composition and trace substances
MassFlowSource_WeatherData	Ideal flow source that produces a prescribed mass flow with prescribed trace substances, outside specific enthalpy and mass fraction
MassFlowSource_h	Ideal flow source that produces a prescribed mass flow with prescribed specific enthalpy, composition and trace substances
Outside	Boundary that takes weather data, and optionally trace substances, as an input
Outside_Cp	Boundary that takes weather data, and optionally the wind pressure coefficient and trace substances, as an input
Outside_CpData	Boundary that takes weather data as an input and computes the wind pressure from a given wind pressure profile
Outside_CpLowRise	Boundary that takes weather data as an input and computes the wind pressure for low-rise buildings based on the equation from Swami and Chandra (1987)
PropertySource_T	Model for overriding fluid properties that flow through the component, using temperature input
PropertySource_h	Model for overriding fluid properties that flow through the component, using specific enthalpy input
TraceSubstancesFlowSource	Source with mass flow that does not take part in medium mass balance (such as CO2)
Examples	Collection of models that illustrate model use and test models
Validation	Collection of validation models
BaseClasses	Package with base classes for Buildings.Fluid.Sources