modelController

Validation of the top-level controller

Information

This example validates Buildings.Obsolete.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.Controller.

Components

TypeNameDefaultDescription
Buildings.Obsolete.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.ControllerconVAVValidate the heating case
Buildings.Obsolete.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.ControllerconVAV1Validate the cooling case
Buildings.Obsolete.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.ControllerconVAV2Validate the cooling case
Buildings.Obsolete.Controls.OBC.ASHRAE.G36_PR1.AHUs.SingleZone.VAV.ControllerconVAV3Validate the cooling case
Buildings.Controls.OBC.CDL.Reals.Sources.RampTZonMeasured zone temperature
Buildings.Controls.SetPoints.OccupancyScheduleoccSchOccupancy schedule
Buildings.Controls.OBC.CDL.Reals.Sources.ConstantTCutFixed dry bulb temperature high limit cutoff for economizer
Buildings.Controls.OBC.CDL.Reals.Sources.ConstantnOccNumber of occupants
Buildings.Controls.OBC.CDL.Logical.Sources.ConstantwinWindow status
Buildings.Controls.OBC.CDL.Reals.Sources.ConstantTOutOutdoor air dry bulb temperature
Buildings.Controls.OBC.CDL.Reals.Sources.ConstantTOut1Outdoor air dry bulb temperature
Buildings.Controls.OBC.CDL.Reals.Sources.RampTZon1Measured zone temperature
Buildings.Controls.OBC.CDL.Reals.Sources.ConstantTOut2Outdoor air dry bulb temperature
Buildings.Controls.OBC.CDL.Reals.Sources.ConstantTOut3Outdoor air dry bulb temperature
Buildings.Controls.OBC.CDL.Reals.Sources.RampTSupTerminal unit discharge air temperature
Buildings.Controls.OBC.CDL.Reals.Sources.RampTSup1Terminal unit discharge air temperature
Buildings.Controls.OBC.CDL.Integers.Sources.ConstantdemLimCooling and heating demand imit level
Buildings.Controls.OBC.CDL.Reals.Sources.ConstantcooWarTimCooldown and warm-up time

Revisions

  • August 7, 2019, by Kun Zhang:
    Included more validation cases.
  • October 24, 2018, by David Blum:
    First implementation.