blockVAVBoxControlPoints
Emulation of VAV box control points
Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).
Information
This class generates signals typically provided by the terminal unit controller. It is aimed for validation purposes only.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Controls.OBC.ASHRAE.G36.Types.VentilationStandard | stdVen | Ventilation standard |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Templates.ZoneEquipment.Interfaces.Bus | bus | Terminal unit control bus |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Controls.OBC.CDL.Reals.Sources.Constant | tNexOcc | Time next occupancy | |
| Buildings.Controls.OBC.CDL.Reals.Sources.Constant | VAirDis_flow | ||
| Buildings.Controls.OBC.CDL.Integers.Sources.Constant | yReqZonTemRes | Request | |
| Buildings.Controls.OBC.CDL.Integers.Sources.Constant | yReqZonPreRes | Request | |
| Buildings.Controls.OBC.CDL.Reals.Sources.Constant | TAirDis | Discharge temperature | |
| Controls.OBC.CDL.Integers.Sources.Constant | uOpeMod | Operating mode | |
| Buildings.Controls.OBC.ASHRAE.G36.ZoneGroups.ZoneStatus | sta | Evaluate zone temperature status | |
| Controls.OBC.CDL.Reals.Sources.Constant | cooDowTim | Cooling down time | |
| Controls.OBC.CDL.Reals.Sources.Constant | warUpTim | Warm-up time | |
| Controls.OBC.ASHRAE.G36.VentilationZones.Title24.Setpoints | setMinOA_T24 | Zone level calculation of the minimum outdoor airflow setpoint | |
| Buildings.Controls.OBC.ASHRAE.G36.VentilationZones.ASHRAE62_1.Setpoints | setMinOA_62_1 | Zone level calculation of the minimum outdoor airflow setpoint |