modelDampers
Validation model for damper components
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
This model validates the various configurations of the model Buildings.Templates.Components.Actuators.Damper by exposing this model to a fixed pressure difference and a control signal varying from 0 to 1.
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Interfaces.Bus | bus | Control bus | |
| Interfaces.Bus | bus1 | Control bus | |
| Interfaces.Bus | bus2 | Control bus |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Fluid.Sources.Boundary_pT | bouAirEnt | Boundary conditions for entering air | |
| Fluid.Sources.Boundary_pT | bouAirLvg | Boundary conditions for leaving air | |
| Buildings.Templates.Components.Actuators.Damper | mod | Modulating damper | |
| Buildings.Controls.OBC.CDL.Reals.Sources.Ramp | y | Damper control signal | |
| Buildings.Templates.Components.Actuators.Damper | pre | Pressure independent damper | |
| Buildings.Templates.Components.Actuators.Damper | two | Two-position damper | |
| Buildings.Controls.OBC.CDL.Logical.Sources.TimeTable | y1 | Damper control signal | |
| Buildings.Templates.Components.Actuators.Damper | non | No damper | |
| Fluid.FixedResistances.PressureDrop | res | Flow resistance |
Contents
| Name | Description |
|---|---|
 MediumAir |