modelValves
Validation model for valve components
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
This model validates the various configurations of the model Buildings.Templates.Components.Actuators.Valve by exposing this model to a fixed pressure difference and a control signal varying from 0 to 1.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Dynamics › Conservation equations | |||
| Modelica.Fluid.Types.Dynamics | energyDynamics | Modelica.Fluid.Types.Dynamics.FixedInitial | Type of energy balance: dynamic (3 initialization options) or steady state |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Interfaces.Bus | bus | Control bus | |
| Interfaces.Bus | bus1 | Control bus | |
| Interfaces.Bus | bus2 | Control bus | |
| Interfaces.Bus | bus3 | Control bus |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Fluid.Sources.Boundary_pT | bouLiqEnt | Boundary conditions for entering liquid | |
| Fluid.Sources.Boundary_pT | bouLiqLvg | Boundary conditions for leaving liquid | |
| Actuators.Valve | modThr | Three-way modulating valve | |
| Buildings.Controls.OBC.CDL.Reals.Sources.Ramp | y | Damper control signal | |
| Actuators.Valve | twoThr | Three-way two position valve | |
| Actuators.Valve | modTwo | Two-way modulating valve | |
| Buildings.Controls.OBC.CDL.Logical.Sources.TimeTable | y1 | Damper control signal | |
| Actuators.Valve | twoTwo | Two-way two-position valve | |
| Actuators.Valve | non | No valve | |
| Fluid.FixedResistances.PressureDrop | res | Flow resistance |
Contents
| Name | Description |
|---|---|
 MediumLiq |