modelNoOutputVariable
Failing example caused by missing Output:Variable in the idf
Extends from Buildings.ThermalZones.EnergyPlus_24_2_0.Examples.SingleFamilyHouse.Unconditioned (Example model with one unconditoned zone simulated in Modelica, and the other two unconditioned zones simulated in EnergyPlus).
Information
This validation case tests whether Spawn works for an idf file that has no output variables declared.
The model is identical to Buildings.ThermalZones.EnergyPlus_24_2_0.Examples.SingleFamilyHouse.Unconditioned except that it uses an idf file that has no output variables.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Volume | VRoo (from Unconditioned) | 453.1 | Room volume |
| Modelica.Units.SI.MassFlowRate | m_flow_nominal (from Unconditioned) | VRoo*1.2*0.3/3600 | Nominal mass flow rate |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.ThermalZones.EnergyPlus_24_2_0.Building | building (from Unconditioned) | Building model | |
| Buildings.ThermalZones.EnergyPlus_24_2_0.ThermalZone | zon (from Unconditioned) | Thermal zone | |
| Buildings.Fluid.FixedResistances.PressureDrop | duc (from Unconditioned) | Duct resistance (to decouple room and outside pressure) | |
| Buildings.Fluid.Sources.MassFlowSource_WeatherData | bou (from Unconditioned) | Boundary condition | |
| Buildings.Fluid.Sources.Boundary_pT | freshAir (from Unconditioned) | Boundary condition | |
| Modelica.Blocks.Sources.Constant[3] | qIntGai (from Unconditioned) | Internal heat gains, set to zero because these are modeled in EnergyPlus |
Revisions
-
June 1, 2021, by Baptiste Ravache:
First implementation.
This is for issue 2512.