modelOneZoneCompareZoneTemperatureOutput
This example tests whether the zone mean air temperature is reported correctly as an EnergyPlus output
Extends from Buildings.ThermalZones.EnergyPlus_24_2_0.Examples.SingleFamilyHouse.Unconditioned (Example model with one unconditoned zone simulated in Modelica, and the other two unconditioned zones simulated in EnergyPlus).
Information
Simple test case that verifies whether the zone mean air temperature is reported correctly by EnergyPlus. Note that Modelica solves the differential equation for this variable, but this test case obtains its value from EnergyPlus.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Volume | VRoo (from Unconditioned) | 453.1 | Room volume |
| Modelica.Units.SI.MassFlowRate | m_flow_nominal (from Unconditioned) | VRoo*1.2*0.3/3600 | Nominal mass flow rate |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.ThermalZones.EnergyPlus_24_2_0.Building | building (from Unconditioned) | Building model | |
| Buildings.ThermalZones.EnergyPlus_24_2_0.ThermalZone | zon (from Unconditioned) | Thermal zone | |
| Buildings.Fluid.FixedResistances.PressureDrop | duc (from Unconditioned) | Duct resistance (to decouple room and outside pressure) | |
| Buildings.Fluid.Sources.MassFlowSource_WeatherData | bou (from Unconditioned) | Boundary condition | |
| Buildings.Fluid.Sources.Boundary_pT | freshAir (from Unconditioned) | Boundary condition | |
| Modelica.Blocks.Sources.Constant[3] | qIntGai (from Unconditioned) | Internal heat gains, set to zero because these are modeled in EnergyPlus | |
| Buildings.ThermalZones.EnergyPlus_24_2_0.OutputVariable | zonMeaAirTem | Block that reads output from EnergyPlus |
Revisions
-
April 2, 2020, by Michael Wetter:
First implementation.