modelZone
Model of a thermal zone
Extends from Modelica.Blocks.Icons.Block (Basic graphical layout of input/output block).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| String | zoneName | "" | Name of the thermal zone |
| Modelica.Units.SI.MassFlowRate | mOut_flow | 0.3/3600*zon.V*Buildings.Media.Air.dStp | Outside air mass flow rate with 0.3 ACH |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealOutput | TAir | Air temperature of the zone | |
| Modelica.Blocks.Interfaces.RealOutput | TRad | Radiative temperature of the zone | |
| Modelica.Blocks.Interfaces.RealOutput | phi | Relative humidity of zone air | |
| BoundaryConditions.WeatherData.Bus | weaBus | Bus with weather data |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Sources.Constant | qConGai_flow | Convective heat gain | |
| Modelica.Blocks.Sources.Constant | qRadGai_flow | Radiative heat gain | |
| Modelica.Blocks.Routing.Multiplex3 | multiplex3_1 | Multiplex to combine signals into a vector | |
| Buildings.ThermalZones.EnergyPlus_24_2_0.ThermalZone | zon | Thermal zone (core zone of the office building with 5 zones) | |
| Buildings.Fluid.FixedResistances.PressureDrop | duc | Duct resistance (to decouple room and outside pressure) | |
| Buildings.Fluid.Sources.MassFlowSource_WeatherData | bou | Mass flow rate boundary condition | |
| Buildings.Fluid.Sources.Boundary_pT | freshAir | Pressure boundary condition | |
| Modelica.Blocks.Sources.Constant | qLatGai_flow | Latent heat gain | |
| Buildings.Fluid.Sensors.RelativeHumidity | senRelHum | Relative humidity in the room as computed by Modelica |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |