modelHystereticNIC
Ideal model of a negative impedance converter
Extends from Modelica.Electrical.Analog.Interfaces.OnePort (Component with two electrical pins p and n and current i from p to n).
Information
This is a simple algebraic model of a Negative Impedance Converter.
Note:
This is the hysteretic version of the IdealNIC suitable for prescribed current i. The inner part of the characteristic with negative slope is omitted. The voltage v jumps when the right / upper or left / lower corner is reached to the other branch.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| ParameterSets.NIC.NICData | nicData | ||
| Boolean | pre_rh_start | false | Value of pre(rh) at initial time |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| PositivePin | p (from TwoPin) | Positive electrical pin | |
| NegativePin | n (from TwoPin) | Negative electrical pin |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Voltage | v (from TwoPin) | Voltage drop of the two pins (= p.v - n.v) | |
| SI.Current | i (from OnePort) | Current flowing from pin p to pin n | |
| Boolean | rh | Right / high branch of (outer) characteristic |