modelImprovedNIC
Improved model of a negative impedance converter
Extends from Modelica.Electrical.Analog.Interfaces.TwoPin (Component with two electrical pins).
Information
This is an improved implementation of a Negative Impedance Converter with opAmps.
Note that the opAmp model has to take into account saturation of the output.
Note that p.i + n.i <> 0 due to the active opAmp (with implicit supply) inside!
Note:
If voltage v is prescribed, the current i can be unambiguously determined.
If current i is prescribed, in the range between the zero crossings the voltage v has 2 or 3 possible solutions.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| ParameterSets.NIC.NICData | nicData |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| PositivePin | p (from TwoPin) | Positive electrical pin | |
| NegativePin | n (from TwoPin) | Negative electrical pin |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Voltage | v (from TwoPin) | Voltage drop of the two pins (= p.v - n.v) | |
| SI.Current | i | p.i | Current flowing at pin p into the component |
| SI.Current | ineg | n.i | Current flowing at pin n out of the component |
| Modelica.Electrical.Analog.Basic.Resistor | rPos | ||
| ImprovedOpAmp3Pin | opAmp | ||
| Modelica.Electrical.Analog.Basic.Resistor | rNeg | ||
| Modelica.Electrical.Analog.Basic.Resistor | rg |