modelPipeWithHotwell
Extends from ClaRa.Basics.ControlVolumes.Fundamentals.Geometry.GenericGeometry (All shapes || Base class).
Information
For detailed model documentation please consult the html-documentation shipped with ClaRa.
Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright © 2011-2024.References:
For references please consult the html-documentation shipped with ClaRa.
Remarks:
This component was developed by ClaRa development team under the 3-clause BSD License.
Acknowledgements:ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
The ClaRa development team consists of the following partners:
TLK-Thermo GmbH (Braunschweig, Germany)
XRG Simulation GmbH (Hamburg, Germany).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | N_heat (from GenericGeometry) | 2 | No. of heat transfer areas |
| Essential Geometry Definition | |||
| Units.Volume | volume (from GenericGeometry) | 1 | Volume of the component |
| Units.Area[N_heat] | A_heat (from GenericGeometry) | ones(N_heat) | Heat transfer area: /1/ dedicated to lateral surface |
| Units.Area[N_heat] | A_heat_CF (from GenericGeometry) | {A_heat[i]*CF_geo[i] for i in 1:N_heat} | Corrected heat transfer area: /1/ dedicated to lateral surface |
| Real[N_heat] | CF_geo (from GenericGeometry) | ones(N_heat) | Correction factor for heat transfer area: /1/ dedicated to lateral surface |
| Units.Area | A_cross (from GenericGeometry) | 1 | Cross section for mass flow |
| Units.Area | A_front (from GenericGeometry) | 1 | Frontal area |
| Units.Area | A_hor (from GenericGeometry) | 1 | Nominal horizonal area |
| Integer | N_inlet (from GenericGeometry) | 1 | Number of inlet ports |
| Integer | N_outlet (from GenericGeometry) | 1 | Number of outlet ports |
| Units.Length[N_inlet] | z_in (from GenericGeometry) | ones(N_inlet) | Height of inlet ports |
| Units.Length[N_outlet] | z_out (from GenericGeometry) | ones(N_outlet) | Height of outlet ports |
| Units.Length | height_fill (from GenericGeometry) | 1 | Fillable height of component |
| Real[:,2] | shape (from GenericGeometry) | [0, 1; 1, 1] | Shape factor, i.e. A_horitontal=A_hor*interp(shape, relLevel) |
| Units.Length | diameter | 1 | Diameter of the component |
| Units.Length | length | 1 | Length of the component (one pass) |
| Integer | N_tubes | 1 | Number of tubes in parallel |
| Integer | N_passes | 1 | Number of passes of the internal tubes |
| Hotwel Geometry | |||
| Units.Length | height_hotwell | 1 | Height of the hotwell |
| Units.Length | width_hotwell | 1 | Width of the hotwell |
| Units.Length | length_hotwell | 1 | Length of the hotwell |
Revisions
For revisions please consult the html-documentation shipped with ClaRa.