modelIdeallySeparated
Extends from ClaRa.Basics.ControlVolumes.Fundamentals.SpacialDistribution.IdealPhases (The phases are in ideal thermodynamic equilibrium), ClaRa.Basics.Icons.IdealSeparation.
Information
For detailed model documentation please consult the html-documentation shipped with ClaRa.
Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright © 2011-2024.References:
For references please consult the html-documentation shipped with ClaRa.
Remarks:
This component was developed by ClaRa development team under the 3-clause BSD License.
Acknowledgements:ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
The ClaRa development team consists of the following partners:
TLK-Thermo GmbH (Braunschweig, Germany)
XRG Simulation GmbH (Hamburg, Germany).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Real | level_rel_start (from IdealPhases) | 0.5 | Start value for relative filling Level |
| String | modelType (from IdealPhases) | ||
| Boolean | useHomotopy | ||
| Units.Length | radius_flange | 0.05 | Flange radius |
| Modelica.Blocks.Types.Smoothness | smoothness | Modelica.Blocks.Types.Smoothness.LinearSegments | |Expert Settings|Shape interpretation|Smoothness of table interpolation |
| Units.Length | level_abs_min | 1e-6 | |
| Units.Length | z_max_in | min(geo.z_in[1] + radius_flange, geo.height_fill) | Upper edge of inlet flange |
| Units.Length | z_min_in | max(1e-3, geo.z_in[1] - radius_flange) | Lower edge of inlet flange |
| Units.Length | z_max_out | min(geo.z_out[1] + radius_flange, geo.height_fill) | Upper edge of outlet flange |
| Units.Length | z_min_out | max(1e-3, geo.z_out[1] - radius_flange) | Lower edge of outlet flange |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| ClaRa.Basics.Records.IComVLE_L2 | iCom (from IdealPhases) | ||
| ClaRa.Basics.ControlVolumes.Fundamentals.Geometry.GenericGeometry | geo (from IdealPhases) | ||
| ClaRa.Basics.Units.EnthalpyMassSpecific | h_inflow (from IdealPhases) | ||
| ClaRa.Basics.Units.EnthalpyMassSpecific | h_outflow (from IdealPhases) | ||
| ClaRa.Basics.Units.PressureDifference | Delta_p_geo_in (from IdealPhases) | ||
| ClaRa.Basics.Units.PressureDifference | Delta_p_geo_out (from IdealPhases) | ||
| Units.Length | level_abs (from IdealPhases) | Absolute filling absLevel | |
| Real | level_rel (from IdealPhases) | Relative filling absLevel | |
| Modelica.Blocks.Tables.CombiTable1Dv | table | ||
| Units.Volume | volume_liq | Liquid volume | |
| Units.Area | A_hor_act | Actual horizontal surface size |
Revisions
For revisions please consult the html-documentation shipped with ClaRa.