modelRealPhases
Extends from ClaRa.Basics.Icons.RealPhases.
Information
For detailed model documentation please consult the html-documentation shipped with ClaRa.
Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright © 2011-2024.References:
For references please consult the html-documentation shipped with ClaRa.
Remarks:
This component was developed by ClaRa development team under the 3-clause BSD License.
Acknowledgements:ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
The ClaRa development team consists of the following partners:
TLK-Thermo GmbH (Braunschweig, Germany)
XRG Simulation GmbH (Hamburg, Germany).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | useHomotopy | True, if homotopy method is used during initialisation | |
| Initialisation | |||
| Real | level_rel_start | 0.5 | Start value for relative filling level (set by applying control volume) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| ClaRa.Basics.Records.IComVLE_L3_NPort | iCom | Internal communication record | |
| ClaRa.Basics.ControlVolumes.Fundamentals.Geometry.GenericGeometry | geo | Geometry record | |
| Units.Pressure[geo.N_inlet] | Delta_p_geo_in | Geodetic pressure difference to inlets | |
| Units.Pressure[geo.N_outlet] | Delta_p_geo_out | Geodetic pressure difference to outlets | |
| Units.MassFraction[geo.N_inlet] | zoneAlloc_in | Allocation of inlet mass flows to zones |1:liq|2:vap| | |
| Units.MassFraction[geo.N_outlet] | zoneAlloc_out | Allocation of outlet mass flows to zones |1:liq|2:vap| | |
| Units.Length | level_abs | Absolute filling absLevel | |
| Real | level_rel | Relative filling absLevel | |
| ClaRa.Basics.Units.MassFlowRate[geo.N_inlet] | m_flow_inliq | Mass flow passing from inlet to zone 1 and vice versa | |
| ClaRa.Basics.Units.MassFlowRate[geo.N_inlet] | m_flow_invap | Mass flow passing from inlet to zone 2 and vice versa | |
| ClaRa.Basics.Units.MassFlowRate[geo.N_outlet] | m_flow_outliq | Mass flow passing from outlet to zone 1 and vice versa | |
| ClaRa.Basics.Units.MassFlowRate[geo.N_outlet] | m_flow_outvap | Mass flow passing from outlet to zone 2 and vice versa | |
| ClaRa.Basics.Units.EnthalpyMassSpecific[geo.N_inlet] | H_flow_inliq | Enthalpy flow passing from inlet to zone 1 and vice versa | |
| ClaRa.Basics.Units.EnthalpyMassSpecific[geo.N_inlet] | H_flow_invap | Enthalpy flow passing from inlet to zone 2 and vice versa | |
| ClaRa.Basics.Units.EnthalpyMassSpecific[geo.N_outlet] | H_flow_outliq | Enthalpy flow passing from outlet to zone 1 and vice versa | |
| ClaRa.Basics.Units.EnthalpyMassSpecific[geo.N_outlet] | H_flow_outvap | Enthalpy flow passing from outlet to zone 2 and vice versa |
Revisions
For revisions please consult the html-documentation shipped with ClaRa.