modelSummary
Extends from ClaRa.Basics.Icons.RecordIcon.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | showExpertSummary |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| ECom | eCom | ||
| SI.HeatFlowRate[3] | Q_flow | Heat flow rate of zones |1|2|3| | |
| SI.HeatFlowRate | Q_flow_tot | Total heat flow rate | |
| Real[3] | C_flow_low | Lower heat capacity flow in zones |1|2|3| | |
| Real[3] | C_flow_high | Higher heat capacity flow in zones |1|2|3| | |
| Real[3] | C_flow_i | Inner side heat capacity flow in zones |1|2|3| | |
| Real[3] | C_flow_o | Outer side heat capacity flow in zones |1|2|3| | |
| SI.Temperature[6] | T_i | Temperatures (i/o) of outer flow zones |1|2|3| | |
| SI.Temperature[6] | T_o | Temperatures (i/o) of outer flow zones |1|2|3| | |
| SI.Temperature | T_i_sat | Inner side saturation temperature | |
| SI.Temperature | T_o_sat | Outer side saturation temperature | |
| Real[3] | yps | Area fractions | |
| Real[3] | effectiveness | ||
| Real[3] | cp_error_ | Check: Deviation from constant cp in zones |1|2|3| | |
| ClaRa.Basics.Units.HeatCapacityFlowRate[3] | kA | The product U*A for regions |1|2|3| | |
| SI.HeatCapacityMassSpecific[3] | cp_o | Heat capacity | |
| SI.HeatCapacityMassSpecific[3] | cp_i | Heat capacity | |
| Units.DensityMassSpecific[3] | d | Material density |