modelCompressorVLE_L1_simple
A compressor for VLE mixtures with a volume flow rate depending on drive power and pressure difference only
Extends from ClaRa.Components.TurboMachines.Pumps.Fundamentals.Pump_Base (Base class for pumps), ClaRa.Basics.Icons.ComplexityLevel (Displays the complexity level inside model icon ).
Information
For detailed model documentation please consult the html-documentation shipped with ClaRa.
Authorship and Copyright Statement for original (initial) Contribution
Author:
ClaRa development team, Copyright © 2017 - 2022.References:
For references please consult the html-documentation shipped with ClaRa.
Remarks:
This component was developed for ClaRa library.
Acknowledgements:
CLA:
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Fundamental Definitions | |||
| TILMedia.VLEFluid.Types.BaseVLEFluid | medium (from Pump_Base) | simCenter.fluid1 | Medium in the component |
| Summary and Visualisation | |||
| Boolean | showExpertSummary (from Pump_Base) | simCenter.showExpertSummary | True, if expert summary should be applied |
| Boolean | showData (from Pump_Base) | true | True, if a data port containing p,T,h,s,m_flow shall be shown, else false |
| Boolean | contributeToCycleSummary (from Pump_Base) | simCenter.contributeToCycleSummary | True if component shall contribute to automatic efficiency calculation |
| Part Load and Efficiency | |||
| Real | eta_mech | 0.98 | Mechanic efficiency of the drive |
| Real | eta_hyd | 0.9 | Hydraulic efficiency |
| Initialisation | |||
| ClaRa.Basics.Units.MassFlowRate | m_flow_start | 1 | Initial guess value for mass flow |
| Expert Settings › Numerical Robustnes | |||
| ClaRa.Basics.Units.Pressure | Delta_p_eps | 100 | Small pressure difference for linearisation around zero |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| ClaRa.Basics.Interfaces.FluidPortIn | inlet (from Pump_Base) | ||
| ClaRa.Basics.Interfaces.FluidPortOut | outlet (from Pump_Base) | ||
| Basics.Interfaces.EyeOut | eye (from Pump_Base) | ||
| Modelica.Blocks.Interfaces.RealInput | P_drive | Power input of the pump's motor |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Basics.Units.Pressure | Delta_p (from Pump_Base) | Pressure difference between pressure side and suction side | |
| Basics.Units.VolumeFlowRate | V_flow (from Pump_Base) | Volume flow rate | |
| Basics.Units.Power | P_fluid (from Pump_Base) | Power to the fluid | |
| ClaRa.SimCenter | simCenter (from Pump_Base) | ||
| String | complexity (from ComplexityLevel) | "??" | |
| ClaRa.Basics.Interfaces.Connected2SimCenter | connected2SimCenter |
Revisions
For revisions please consult the html-documentation shipped with ClaRa.