recordIComPump_L1
Extends from ClaRa.Basics.Icons.IComIcon.
Information
For detailed model documentation please consult the html-documentation shipped with ClaRa.
Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright © 2011-2024.References:
For references please consult the html-documentation shipped with ClaRa.
Remarks:
This component was developed by ClaRa development team under the 3-clause BSD License.
Acknowledgements:ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
The ClaRa development team consists of the following partners:
TLK-Thermo GmbH (Braunschweig, Germany)
XRG Simulation GmbH (Hamburg, Germany).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| General | |||
| TILMedia.VLEFluid.Types.BaseVLEFluid | medium | Used medium model | |
| Nominal | |||
| Basics.Units.VolumeFlowRate | V_flow_max | Max. flow at Delta_p = 0 and rpm_nom | |
| Basics.Units.RPM | rpm_nom | nominal rotational speed | |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Basics.Units.Power | P_iso | Power for isentropic flow | |
| Basics.Units.Pressure | Delta_p | Pressure difference between pressure side and suction side | |
| Basics.Units.VolumeFlowRate | V_flow | Volume flow | |
| Basics.Units.RPM | rpm | Rotational speed | |
| Basics.Units.MassFlowRate | m_flow | Mass flow | |
| Basics.Units.Pressure | Delta_p_max_var | Max. pressure difference at V_flow = 0 and rpm_nom | |
| TILMedia.Internals.TILMediaExternalObject | fluidPointer_in | Pointer to inlet gas object | |
| Basics.Units.Pressure | p_in | Inlet pressure | |
| Basics.Units.EnthalpyMassSpecific | h_in | Inlet enthalpy | |
| Basics.Units.MassFraction[medium.nc - 1] | xi_in | Inlet medium composition | |
| Basics.Units.EnthalpyMassSpecific | h_in_iso | Intlet isentropic enthalpy | |
| TILMedia.Internals.TILMediaExternalObject | fluidPointer_out | Pointer to outlet gas object | |
| Basics.Units.Pressure | p_out | Outlet pressure | |
| Basics.Units.EnthalpyMassSpecific | h_out | Outlet enthalpy | |
| Basics.Units.MassFraction[medium.nc - 1] | xi_out | Outlet medium composition | |
| Basics.Units.EnthalpyMassSpecific | h_out_iso | Outlet isentropic enthalpy |
Revisions
For revisions please consult the html-documentation shipped with ClaRa.