| ClaRa.SimCenter | simCenter | | |
| Modelica.Units.SI.MassFlowRate | idealMixture_m_flow | | Idealized mass flow |
| Modelica.Units.SI.MolarFlowRate | n_flow_NH3_in | | Molar flow rate of ammonia at inlet |
| Modelica.Units.SI.MolarFlowRate | n_flow_O2_in | | Molar flow rate of oxygen at inlet |
| Modelica.Units.SI.MolarFlowRate | n_flow_NOx_in | | Molar flow rate of nitric oxides at inlet |
| Modelica.Units.SI.MolarFlowRate | n_flow_NH3_Cat_in | | Catalysis inlet ammonia mass flow |
| Modelica.Units.SI.MolarFlowRate | n_flow_O2_Cat_in | | Catalysis inlet oxygen mass flow |
| Modelica.Units.SI.MolarFlowRate | n_flow_NOx_Cat_in | | Catalysis inlet nitric oxide mass flow |
| Modelica.Units.SI.MolarFlowRate | n_flow_N2_Cat_out | | Catalysis outlet nitrogen mass flow |
| Modelica.Units.SI.MolarFlowRate | n_flow_H2O_Cat_out | | Catalysis outlet water mass flow |
| Modelica.Units.SI.MolarFlowRate | n_flow_NH3_exc | | Molar flow of excess ammonia |
| Modelica.Units.SI.MolarFlowRate | n_flow_O2_Cat_exc | | Molar flow of excess oxygen |
| Modelica.Units.SI.MolarFlowRate | n_flow_NOx_Cat_exc | | Molar flow of excess nitric oxide |
| Modelica.Units.SI.MolarInternalEnergy | Delta_R_H | | Standard reaction enthalpy |
| Modelica.Units.SI.HeatFlowRate | Qdot | | Heat flow to environment (equals reaction heat) |
| Modelica.Units.SI.HeatFlowRate | reactionHeat | | Reaction heat |
| Real | NOx_separationRate | | Efficiency of NOx separation |
| Integer | Case | | |
| Real[medium.nc - 1] | xi_idealMixture | | Gas mixture ideal |
| Real[medium.nc - 1] | xi_CatalysisOut | | Gas mixture at catalysis outlet |
| Real | h_idealMixture | | Specific enthalpy of gas mixture ideal |
| Real | h_CatalysisOut | | Specific enthalpy of gas mixture at catalysis outlet |
| TILMedia.Gas.Gas_pT | gasMixture_a | | |
| TILMedia.Gas.Gas_pT | gasMixture_NH3in | | |
| TILMedia.Gas.Gas_ph | gasMixture_idealMixture | | |
| TILMedia.Gas.Gas_ph | gasMixture_CatalysisOut | | |