Model for a burner section inside a combustion chamber which is able to regard drying of unburnt fuel which contained water at burner inlet
Model description: A stationary burner model for fuel fired furnaces
Contact: Lasse Nielsen, TLK-Thermo GmbH
FEATURES
- This model uses TILMedia
- Stationary mass and energy balances are used
- The formation enthalpy of the used fuel is calculated with the given Lower heating value and and ideal combustion with the given elemental composition of the fuel
- Lower heating can be regarded with a fixed value or calculated according to the "Verbandsformel"
- Different heat transfer correlations can be chosen
- Amount of burnable fuel mass is calculated with particle diffusity which depends on models used to determine the mean migration speed according to the volume flow rates of the flue gas
- Excess air is calculated for burner (lambda primary) and overall volume (lambda) separately
Contents
Generated at 2025-08-12T18:38:51Z
by OpenModelicaOpenModelica 1.25.1 using GenerateDoc.mos
.ClaRa_Obsolete.Components.Furnace.Burner.Burner_L2_Dynamic_fuelDrying
ReactionZone_out