| TILMedia.VLEFluid.Types.BaseVLEFluid | medium | simCenter.fluid1 | |Fundamental Definitions|Medium in the component |
| Real | P_target_ | | Target power in p.u. |
| ClaRa.Basics.Units.MassFlowRate | m_flow_nom | | |
| ClaRa.Basics.Units.Temperature | T_LS_nom | | |Fundamental Definitions|Life steam temperature at nominal load |
| ClaRa.Basics.Units.Temperature | T_RS_nom | | |Fundamental Definitions|Reheated steam temperature at nominal load |
| ClaRa.Basics.Units.Pressure | Delta_p_LS_nom | | |Fundamental Definitions|Life steam pressure loss at nominal load |
| ClaRa.Basics.Units.Pressure | Delta_p_RS_nom | | |Fundamental Definitions|Reheated steam pressure loss at nominal load |
| ClaRa.Basics.Units.Pressure | p_LS_out_nom | | |Fundamental Definitions|Life steam pressure at nominal load |
| ClaRa.Basics.Units.Pressure | p_RS_out_nom | | |Fundamental Definitions|Reheated steam pressure at nominal load |
| ClaRa.Basics.Units.HeatFlowRate | Q_nom | m_flow_feed*(h_LS_out - h_LS_in) + m_flow_cRH*(h_RS_out - h_RS_in) | |
| ClaRa.Basics.Units.MassFlowRate | m_flow_feed | m_flow_nom*P_target_ | Mass flow rate feedwater |
| ClaRa.Basics.Units.MassFlowRate | m_flow_cRH | | Mass flow rate of cold Re-Heat |
| ClaRa.Basics.Units.EnthalpyMassSpecific | h_LS_in | | Inlet specific enthalpy |
| ClaRa.Basics.Units.EnthalpyMassSpecific | h_RS_in | | Inlet specific enthalpy |
| Real | Delta_p_LS_ | | |
| Real | Delta_p_RS_ | | |
| Real | Q_LS_ | (h_LS_out - h_LS_in)*m_flow_feed/Q_nom | Heat release in life steam at current load |
| Real | Q_RS_ | 1 - Q_LS_ | Heat release in reheated steam at current load |
| ClaRa.Basics.Units.EnthalpyMassSpecific | h_LS_out | TILMedia.VLEFluid.Functions.specificEnthalpy_pTxi(medium, p_LS_out, T_LS_nom) | Outlet specific enthalpy |
| ClaRa.Basics.Units.EnthalpyMassSpecific | h_RS_out | TILMedia.VLEFluid.Functions.specificEnthalpy_pTxi(medium, p_RS_out, T_RS_nom) | Outlet specific enthalpy |
| ClaRa.Basics.Units.Pressure | p_LS_in | p_LS_out + Delta_p_LS_*Delta_p_LS_nom | Inlet pressure |
| ClaRa.Basics.Units.Pressure | p_LS_out | P_target_*p_LS_out_nom | Life steam pressure at current load |
| ClaRa.Basics.Units.Pressure | p_RS_in | p_RS_out + Delta_p_RS_*Delta_p_RS_nom | Inlet pressure |
| ClaRa.Basics.Units.MassFlowRate | m_flow_HP_in | | HP inlet mass flow |
| ClaRa.Basics.Units.Pressure | p_RS_out | P_target_*p_RS_out_nom | Reheated steam pressure at current load |
| Part Load Definition |
| Real[:,:] | CharLine_Delta_p_HP_mLS_ | [0, 0; 0.1, 0.01; 0.2, 0.04; 0.3, 0.09; 0.4, 0.16; 0.5, 0.25; 0.6, 0.36; 0.7, 0.49; 0.8, 0.64; 0.9, 0.81; 1, 1] | Characteristic line of pressure drop as function of mass flow rate |
| Real[:,:] | CharLine_Delta_p_IP_mRS_ | [0, 0; 0.1, 0.01; 0.2, 0.04; 0.3, 0.09; 0.4, 0.16; 0.5, 0.25; 0.6, 0.36; 0.7, 0.49; 0.8, 0.64; 0.9, 0.81; 1, 1] | Characteristic line of pressure drop as function of mass flow rate |
