.ComplexLib.MultiPhase.Basic.VariableConductor

Information

The model contains m linear conductors. Conductor no. k connects the branch voltage phasor v[k] with the corresponding branch current phasor i[k] by

      i[k] = G*v[k]

Attention!!!
To ensure that the phasor domain-based model works in a quasi-stationary mode, the input signal G may alter only very slowly in comparison with both the nominal frequency f=ω/(2π) and the dominant time constant of the phasor domain-based model.

Remark:
It is recommended that the G signal should not cross the zero value.