modelTwoPin
Component having two ComplexPins p and n (one port) and NOT using current phasor balance
Information
Superclass of elements which have one port i.e. two electrical pins of type ComplexPin. No inner current balance between the two complex pins is used. Hence, class TwoPin is suitable for building internal electrical circuits consisting of components extended from superclasses OnePort or TwoPort.
Fraunhofer IIS/EAS, Dresden
email: olaf.enge@eas.iis.fraunhofer.de
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| PosComplexPin | p | Positive complex pin (potential p.v > n.v for positive voltage drop v) | |
| NegComplexPin | n | Negative complex pin | |
| Modelica.Blocks.Interfaces.RealOutput | activePwr | Active power of component | |
| Modelica.Blocks.Interfaces.RealOutput | reactivePwr | Reactive power of component | |
| ComplexLib.Interfaces.ComplexOutput | complexPwr | Complex value of power of component |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| SI.Voltage | v | Voltage phasor | |
| SI.Voltage | vRe | Active part of voltage phasor | |
| SI.Voltage | vIm | Reactive part of voltage phasor | |
| SI.Current | i | Current phasor | |
| SI.Current | iRe | Active part of current phasor | |
| SI.Current | iIm | Reactive part of current phasor | |
| SI.Angle | phi | Angle between voltage and current phasors | |
| SI.Angle | phi_v | Angle of voltage phasor | |
| SI.Angle | phi_i | Angle of current phasor |