modelSignalPower

Source component with a specified power phasor

Extends from ComplexLib.SinglePhase.Interfaces.OnePortSrc (Source component having two ComplexPins p and n (one port) and using current phasor balance).

Information

The SignalPower source component applies a power phasor of variable rms and phase into the phasor-based electrical circuit. Hence, these values are specified by input signals.

Attention!!!
To ensure that the phasor domain-based model works in a quasi-stationary mode, both rms value and phase angle may alter only very slowly in comparison with both the nominal frequency f=ω/(2π) and the dominant time constant of the phasor domain-based model.

Main Author:
Olaf Enge-Rosenblatt
Fraunhofer IIS/EAS, Dresden
email: olaf.enge@eas.iis.fraunhofer.de

Connectors

TypeNameDefaultDescription
PosComplexPinp (from OnePortSrc)Positive complex pin (potential p.v > n.v for positive voltage drop v)
NegComplexPinn (from OnePortSrc)Negative complex pin
Modelica.Blocks.Interfaces.RealOutputactivePwr (from OnePortSrc)Active power of component
Modelica.Blocks.Interfaces.RealOutputreactivePwr (from OnePortSrc)Reactive power of component
ComplexLib.Interfaces.ComplexOutputcomplexPwr (from OnePortSrc)Complex value of power of component
Modelica.Blocks.Interfaces.RealInputpowerRms value of applied power phasor [W]
Modelica.Blocks.Interfaces.RealInputphasePhasor angle of applied power [rad]

Components

TypeNameDefaultDescription
SI.Voltagev (from OnePortSrc)Voltage phasor
SI.VoltagevRe (from OnePortSrc)Active part of voltage phasor
SI.VoltagevIm (from OnePortSrc)Reactive part of voltage phasor
SI.Currenti (from OnePortSrc)Current phasor
SI.CurrentiRe (from OnePortSrc)Active part of current phasor
SI.CurrentiIm (from OnePortSrc)Reactive part of current phasor
SI.Anglephi (from OnePortSrc)Angle between voltage and current phasors
SI.Anglephi_v (from OnePortSrc)Angle of voltage phasor
SI.Anglephi_i (from OnePortSrc)Angle of current phasor