.DeployStructLib.Properties.BeamXProperties

Information

Beam cross section properties for use with the DeployStructLib.Parts.Beam block. Properties are automatically calculated based on cross section dimensions.

To use these properties, add DeployStructLib.Properties.BeamProperties to your model, and provide the cross-section type and the relevant dimensions. Then, give the Beam block the name of this record.

Available cross-sections are:

The " General Section" asks for the inertia tensor and area directly, allowing you to use cross sections other than the standard provided here. Note: cross sections are assumed to be constant along the length of the beam.

Copyright © 2018
ATA ENGINEERING, INC.
ALL RIGHTS RESERVED

Contents

NameDescription
 beamCrossSectionType
 beamXProperty
 RectBarProperty
 RectTubeProperty
 CircRodProperty
 CircTubeProperty
 GeneralSectionProperty
 getShapeType
 getShapeExtra
 getDim
 BeamAreaCalc
 BeamIyyCalc
 BeamIzzCalc
 BeamJCalc
 BeamIttCalc
 BeamCMCalc
Generated at 2024-12-26T19:25:54Z by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos