modelBasePControl4
Base active power control module for type 4 wind turbines (IEC N°61400-27-1)
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Types.ApparentPowerModule | SNom | Nominal converter apparent power in MVA | |
| PControl | |||
| Types.PerUnit | Kpaw | Anti-windup gain for the integrator of the ramp-limited first order in pu/s (base SNom) | |
| Initialization | |||
| Types.CurrentModulePu | Ip0Pu | Initial active current component at converter terminal in pu (base UNom, SNom) (generator convention) | |
| Types.PerUnit | IpMax0Pu | Initial maximum active current at converter terminal in pu (base UNom, SNom) (generator convention) | |
| Operating point | |||
| Types.ActivePowerPu | P0Pu | Initial active power at grid terminal in pu (base SnRef) (receptor convention) | |
| Types.VoltageModulePu | U0Pu | Initial voltage amplitude at grid terminal in pu (base UNom) | |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | ipMaxPu | Maximum active current at converter terminal in pu (base UNom, SNom) (generator convention) | |
| Modelica.Blocks.Interfaces.RealInput | PWTRefPu | Active power reference at grid terminal in pu (base SNom) (generator convention) | |
| Modelica.Blocks.Interfaces.RealOutput | ipCmdPu | Active current command at converter terminal in pu (base UNom, SNom) (generator convention) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Math.Product | product1 | ||
| Modelica.Blocks.Math.Division | division | ||
| Dynawo.NonElectrical.Blocks.NonLinear.Max2 | max1 | ||
| Modelica.Blocks.Sources.Constant | const | ||
| Dynawo.NonElectrical.Blocks.Continuous.AbsLimRateLimFirstOrderAntiWindup | absLimRateLimFirstOrderAntiWindup | ||
| Modelica.Blocks.Sources.Constant | const2 |