modelSt6c
IEEE exciter type ST6C model (2016 standard)
Extends from Dynawo.Electrical.Controls.Machines.VoltageRegulators.Standard.BaseClasses.BaseSt6 (IEEE exciter type ST6 base model).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Types.CurrentModulePu | IlrPu (from BaseSt6) | Exciter output current limit reference in pu (base SNom, user-selected base voltage) | |
| Types.PerUnit | Kc (from BaseSt6) | Rectifier loading factor proportional to commutating reactance | |
| Types.PerUnit | Kcl (from BaseSt6) | Field current limiter conversion factor | |
| Types.PerUnit | Kff (from BaseSt6) | Feedforward gain of inner loop field regulator | |
| Types.PerUnit | Kg (from BaseSt6) | Feedback gain constant of inner loop field regulator | |
| Types.PerUnit | Ki (from BaseSt6) | Potential circuit (current) gain coefficient | |
| Types.PerUnit | Kia (from BaseSt6) | Integral gain of PI | |
| Types.PerUnit | Klr (from BaseSt6) | Gain of field current limiter | |
| Types.PerUnit | Km (from BaseSt6) | Gain of error of inner loop field regulator | |
| Types.PerUnit | Kp (from BaseSt6) | Potential circuit gain | |
| Types.PerUnit | Kpa (from BaseSt6) | Proportional gain of PI | |
| Integer | PositionOel (from BaseSt6) | Input location : (0) none, (1) voltage error summation, (2) take-over at AVR input, (3) AVR input summation, (4) take-over at AVR output | |
| Types.Time | tG (from BaseSt6) | Feedback time constant of inner loop field regulator in s | |
| Types.Angle | Thetap (from BaseSt6) | Potential circuit phase angle in rad | |
| Types.Time | tR (from BaseSt6) | Stator voltage filter time constant in s | |
| Types.VoltageModulePu | VaMaxPu (from BaseSt6) | Maximum output voltage of PI in pu (user-selected base voltage) | |
| Types.VoltageModulePu | VaMinPu (from BaseSt6) | Minimum output voltage of PI in pu (user-selected base voltage) | |
| Types.VoltageModulePu | VbMaxPu (from BaseSt6) | Maximum available exciter field voltage in pu (base UNom) | |
| Types.VoltageModulePu | VrMaxPu (from BaseSt6) | Maximum output voltage of regulator in pu (user-selected base voltage) | |
| Types.VoltageModulePu | VrMinPu (from BaseSt6) | Minimum output voltage of regulator in pu (user-selected base voltage) | |
| Types.PerUnit | XlPu (from BaseSt6) | Reactance associated with potential source in pu (base SNom, UNom) | |
| Types.VoltageModulePu | Efd0Pu (from BaseSt6) | Initial excitation voltage in pu (user-selected base voltage) | |
| Types.CurrentModulePu | Ir0Pu (from BaseSt6) | Initial rotor current in pu (base SNom, user-selected base voltage) | |
| Types.ComplexCurrentPu | it0Pu (from BaseSt6) | Initial complex stator current in pu (base SNom, UNom) | |
| Types.VoltageModulePu | Us0Pu (from BaseSt6) | Initial stator voltage in pu (base UNom) | |
| Types.ComplexVoltagePu | ut0Pu (from BaseSt6) | Initial complex stator voltage in pu (base UNom) | |
| Types.VoltageModulePu | UOel0Pu (from BaseSt6) | 0 | Overexcitation limitation initial output voltage in pu (base UNom) |
| Types.VoltageModulePu | UUel0Pu (from BaseSt6) | 0 | Underexcitation limitation initial output voltage in pu (base UNom) |
| Types.VoltageModulePu | Vb0Pu (from BaseSt6) | Initial available exciter field voltage in pu (base UNom) | |
| Types.VoltageModulePu | Va0Pu (from BaseSt6) | Efd0Pu*(Kg*Km + 1/Vb0Pu)/(Km + Kff) | Initial output voltage of PI in pu (user-selected base voltage) |
| Integer | PositionScl | Input location : (0) none, (1) voltage error summation, (2) take-over at AVR input, (3) AVR input summation, (4) take-over at AVR output | |
| Integer | PositionUel | Input location : (0) none, (1) voltage error summation, (2) take-over at AVR input, (3) AVR input summation, (4) take-over at AVR output | |
| Boolean | Sw1 | If true, power source derived from terminal voltage, if false, independent from terminal voltage | |
| Types.Time | tA | Voltage regulator time constant in s | |
| Types.VoltageModulePu | VmMaxPu | Maximum output voltage of limited first order in pu (user-selected base voltage) | |
| Types.VoltageModulePu | VmMinPu | Minimum output voltage of limited first order in pu (user-selected base voltage) | |
| Types.VoltageModulePu | USclOel0Pu | 0 | Stator current overexcitation limitation initial output voltage in pu (base UNom) |
| Types.VoltageModulePu | USclUel0Pu | 0 | Stator current underexcitation limitation initial output voltage in pu (base UNom) |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | IrPu (from BaseSt6) | Rotor current in pu (base SNom, user-selected base voltage) | |
| Modelica.ComplexBlocks.Interfaces.ComplexInput | itPu (from BaseSt6) | Complex stator current in pu (base SNom, UNom) | |
| Modelica.Blocks.Interfaces.RealInput | UOelPu (from BaseSt6) | Overexcitation limitation output voltage in pu (base UNom) | |
| Modelica.Blocks.Interfaces.RealInput | UPssPu (from BaseSt6) | Power system stabilizer output voltage in pu (base UNom) | |
| Modelica.Blocks.Interfaces.RealInput | UsPu (from BaseSt6) | Stator voltage in pu (base UNom) | |
| Modelica.Blocks.Interfaces.RealInput | UsRefPu (from BaseSt6) | Reference stator voltage in pu (base UNom) | |
| Modelica.ComplexBlocks.Interfaces.ComplexInput | utPu (from BaseSt6) | Complex stator voltage in pu (base UNom) | |
| Modelica.Blocks.Interfaces.RealInput | UUelPu (from BaseSt6) | Underexcitation limitation output voltage in pu (base UNom) | |
| Modelica.Blocks.Interfaces.RealOutput | EfdPu (from BaseSt6) | Excitation voltage in pu (user-selected base voltage) | |
| Modelica.Blocks.Interfaces.RealInput | USclOelPu | Stator current overexcitation limitation output voltage in pu (base UNom) | |
| Modelica.Blocks.Interfaces.RealInput | USclUelPu | Stator current underexcitation limitation output voltage in pu (base UNom) |