modelOverFrequencySupportIBG
Over-frequency control model for generic IBG
Information
When frequency is greater than OmegaDeadBandPu, the IBG unit is requested to decrease its active power injection. The unit participate in over-frequency control with full capacity when frequency reaches OmegaMaxPu. (See figure 2.11 in G. Chaspierre thesis 'Reduced-order modelling of active distribution networks for large-disturbance simulations').Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Types.AngularVelocityPu | OmegaDeadBandPu | Deadband of the overfrequency contribution in pu (base omegaNom) | |
| Types.AngularVelocityPu | OmegaMaxPu | Maximum frequency before disconnection in pu (base omegaNom) |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | omegaPu | Angular frequency in pu (base omegaNom) | |
| Modelica.Blocks.Interfaces.RealInput | PextPu | Active power setpoint in pu (base SNom) | |
| Modelica.Blocks.Interfaces.RealOutput | deltaP | Active power reduction in pu (base SNom) |