.Dynawo.Electrical.Controls.WECC.ElectricalControlPV

Information

This block contains the electrical inverter control of the generic WECC PV model according to (in case page cannot be found, copy link in browser): https://www.wecc.biz/Reliability/WECC%20Solar%20Plant%20Dynamic%20Modeling%20Guidelines.pdf

Following control modes can be activated:

  • local coordinated V/Q control: QFlag = true, VFlag = true
  • only plant level control active: QFlag = false, VFlag = false
  • if plant level control not connected: local powerfactor control: PfFlag = true, otherwise PfFlag = false.

    • The block calculates the idCmdPu and iqCmdPu setpoint values for the generator control based on the selected control algorithm.

    Generated at 2025-01-08T19:40:16Z by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos