| Integer | NbSwitchOffSignals (from SwitchOffLogic) | | Number of switch-off signals to take into account in inputs |
| Boolean | SwitchOffSignal10 (from SwitchOffLogic) | false | Initial switch-off signal 1 |
| Boolean | SwitchOffSignal20 (from SwitchOffLogic) | false | Initial switch-off signal 2 |
| Boolean | SwitchOffSignal30 (from SwitchOffLogic) | false | Initial switch-off signal 3 |
| Boolean | Running0 (from SwitchOffLogic) | if NbSwitchOffSignals >= 3 then not (SwitchOffSignal10 or SwitchOffSignal20 or SwitchOffSignal30) elseif NbSwitchOffSignals >= 2 then not (SwitchOffSignal10 or SwitchOffSignal20) else not SwitchOffSignal10 | Indicates if the component is initially running or not |
| Constants.state | State0 (from SwitchOffGenerator) | Constants.state.Closed | Start value of connection state |
| Types.ActivePowerPu | PGen0Pu (from BaseGeneratorSimplified) | | Start value of active power at terminal in pu (base SnRef) (generator convention) |
| Types.ReactivePowerPu | QGen0Pu (from BaseGeneratorSimplified) | | Start value of reactive power at terminal in pu (base SnRef) (generator convention) |
| Types.VoltageModulePu | U0Pu (from BaseGeneratorSimplified) | | Start value of voltage amplitude at terminal in pu (base UNom) |
| Types.ComplexVoltagePu | u0Pu (from BaseGeneratorSimplified) | | Start value of complex voltage at terminal in pu (base UNom) |
| Types.ComplexCurrentPu | i0Pu (from BaseGeneratorSimplified) | | Start value of complex current at terminal in pu (base UNom, SnRef) (receptor convention) |
| Types.PerUnit | AlphaPuPNom | | Frequency sensitivity in pu (base PNom, OmegaNom) |
| Types.ActivePower | PMax | | Maximum active power in MW |
| Types.ActivePower | PMin | | Minimum active power in MW |
| Types.ActivePower | PNom | | Nominal active power in MW |
| Types.ReactivePower | QMax | | Maximum reactive power in Mvar |
| Types.ReactivePower | QMin | | Minimum reactive power in Mvar |
| Real | TanPhiRef | if PGen0Pu <> 0 then QGen0Pu/PGen0Pu else 0 | Start value of tan(Phi) regulation set point at terminal |
| Types.ApparentPowerModule | SNom | | Apparent nominal power in MVA |
| Types.ReactivePowerPu | QMaxPu | QMax/SystemBase.SnRef | Maximum reactive power in pu (base SnRef) |
| Types.ReactivePowerPu | QMinPu | QMin/SystemBase.SnRef | Minimum reactive power in pu (base SnRef) |
| Types.ActivePowerPu | PMinPu | PMin/SystemBase.SnRef | Minimum active power in pu (base SnRef) |
| Types.ActivePowerPu | PMaxPu | PMax/SystemBase.SnRef | Maximum active power in pu (base SnRef) |
| Types.PerUnit | AlphaPu | AlphaPuPNom*PNom/SystemBase.SnRef | Frequency sensitivity in pu (base SnRef, OmegaNom) |
