modelShuntB
Shunt element with constant susceptance, reactive power depends on voltage
Extends from AdditionalIcons.Shunt, Dynawo.Electrical.Controls.Basics.SwitchOff.SwitchOffShunt (Switch-off model for a shunt).
Parameters
| Type | Name | Default | Description |
|---|
| Integer | NbSwitchOffSignals (from SwitchOffLogic) | | Number of switch-off signals to take into account in inputs |
| Boolean | SwitchOffSignal10 (from SwitchOffLogic) | false | Initial switch-off signal 1 |
| Boolean | SwitchOffSignal20 (from SwitchOffLogic) | false | Initial switch-off signal 2 |
| Boolean | SwitchOffSignal30 (from SwitchOffLogic) | false | Initial switch-off signal 3 |
| Boolean | Running0 (from SwitchOffLogic) | if NbSwitchOffSignals >= 3 then not (SwitchOffSignal10 or SwitchOffSignal20 or SwitchOffSignal30) elseif NbSwitchOffSignals >= 2 then not (SwitchOffSignal10 or SwitchOffSignal20) else not SwitchOffSignal10 | Indicates if the component is initially running or not |
| Constants.state | State0 (from SwitchOffShunt) | Constants.state.Closed | Start value of connection state |
| Types.PerUnit | BPu | | Susceptance in pu (base SnRef), negative values for capacitive consumption (over-excited), positive values for inductive consumption (under-excited) |
| Types.ComplexVoltagePu | u0Pu | | Start value of complex voltage at shunt terminal in pu (base UNom) |
| Types.ComplexApparentPowerPu | s0Pu | | Start value of apparent power at shunt terminal in pu (base SnRef, receptor convention) |
| Types.ComplexCurrentPu | i0Pu | | Start value of complex current at shunt terminal in pu (base UNom, SnRef, receptor convention) |
