modelTransformerVariableTapPQControlled_INIT
Extends from AdditionalIcons.Init.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Types.ApparentPowerModule | SNom | Nominal apparent power in MVA | |
| Types.Percent | R | Resistance in % (base U2Nom, SNom) | |
| Types.Percent | X | Reactance in % (base U2Nom, SNom) | |
| Types.Percent | G | Conductance in % (base U2Nom, SNom) | |
| Types.Percent | B | Susceptance in % (base U2Nom, SNom) | |
| Types.PerUnit | rTfoMinPu | Minimum transformation ratio in pu: U2/U1 in no load conditions | |
| Types.PerUnit | rTfoMaxPu | Maximum transformation ratio in pu: U2/U1 in no load conditions | |
| Integer | NbTap | Number of taps | |
| Types.VoltageModulePu | Uc20Pu | Voltage set-point on side 2 in pu (base U2Nom) | |
| Types.VoltageModule | UTarget | Voltage set-point | |
| Types.VoltageModule | UDeadBand | Voltage dead-band | |
| Boolean | regulating0 | Whether the phase-shifter is initially regulating | |
| Types.ActivePowerPu | P10Pu | Start value of active power at terminal 1 in pu (base SnRef) (receptor convention) | |
| Types.ReactivePowerPu | Q10Pu | Start value of reactive power at terminal 1 in pu (base SnRef) (receptor convention) | |
| Types.VoltageModulePu | U10Pu | Start value of voltage amplitude at terminal 1 in pu (base UNom) | |
| Types.Angle | U1Phase0 | Start value of voltage angle at terminal 1 in rad |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Dynawo.Connectors.ACPower | terminal20 | Connector on side 2 at initialization |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Dynawo.Electrical.Transformers.TransformersVariableTap.TransformerVariableTapPQ_INIT | transformerVariableTapPQ_INIT | ||
| Dynawo.Electrical.Controls.Transformers.TapChangerWithTransformer_INIT | tapChangerWithTransformer_INIT | ||
| Types.ComplexCurrentPu | i10Pu | Start value of complex current at terminal 1 in pu (base U1Nom, SnRef) (receptor convention) | |
| Types.ComplexCurrentPu | i20Pu | Start value of complex current at terminal 2 in pu (base U2Nom, SnRef) (receptor convention) | |
| Types.ComplexVoltagePu | u10Pu | Start value of complex voltage at terminal 1 in pu (base U1Nom) | |
| Types.ComplexVoltagePu | u20Pu | Start value of complex voltage at terminal 2 in pu (base U2Nom) | |
| Boolean | increaseTapToIncreaseValue | Whether increasing the tap will increase the monitored value | |
| Types.PerUnit | rTfo0Pu | Start value of transformer ratio | |
| Integer | Tap0 | Initial tap | |
| Types.VoltageModulePu | U20Pu | Start value of voltage amplitude at terminal 2 in pu (base U2Nom) | |
| Types.VoltageModule | U0 | Initial absolute voltage | |
| State | state0 | Initial state |
Contents
| Name | Description |
|---|---|
| State |