modelSVarCModeChange
Extends from Icons.Example (Icon for runnable examples), Dynawo.Examples.SVarC.BaseClasses.BaseSVarCTestCase (Base model for SVarC test cases).
Information
This test case simulates variations of modes.The SVarC is initially running.
A step on URef from 225 kV to 230kV is realised at t = 1 s.
The SVarC is then turned in manual mode from t = 0.5 s to t = 5 s, switched off from t = 3 s to t = 4 s and switched back on from t = 4 s.
The user variables enabling to simulate this scenario are selectModeAuto and setMode.
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Dynawo.Electrical.Buses.InfiniteBus | infiniteBus (from BaseSVarCTestCase) | ||
| Dynawo.Electrical.Lines.Line | line (from BaseSVarCTestCase) | ||
| Dynawo.Electrical.StaticVarCompensators.SVarCStandard | sVarCStandard (from BaseSVarCTestCase) | ||
| Modelica.Blocks.Sources.Step | URef | ||
| Modelica.Blocks.Sources.BooleanPulse | selectMode | ||
| Modelica.Blocks.Logical.Not | not1 | ||
| Modelica.Blocks.Sources.IntegerStep | integerStep | ||
| Modelica.Blocks.Sources.IntegerStep | integerStep1 | ||
| Modelica.Blocks.Sources.IntegerConstant | integerConstant1 | ||
| Modelica.Blocks.MathInteger.Sum | manualMode |