modelWTG3CurrentSource2

WECC Wind Type 3 Model (including the plant controller) - WTG3 - on infinite bus

Extends from Modelica.Icons.Example (Icon for runnable examples).

Information

This test case consists in one simplified Wind Turbine type 3 park connected to an infinite bus, which voltage is reduced to 0.5 pu from t = 1 s to t = 2 s, and which frequency is increased to 1.01 pu from t = 6 s to t = 6.5 s. This setup is used to observe the dynamic behavior of the WTG3 system in response to voltage and frequency variations at its terminal. In this version, Pitch Controller A has been replaced with Pitch Controller B, which provides enhanced flexibility through additional tuning parameters. This allows for better adjustment of the pitch response to rotor speed variations under different operating conditions.  





Components

TypeNameDefaultDescription
Dynawo.Electrical.Buses.InfiniteBusWithVariationsinfiniteBus
Dynawo.Electrical.Lines.Lineline
Dynawo.Electrical.Wind.WECC.WTG3CurrentSource2WTG3
Modelica.Blocks.Sources.ConstantPRefPu
Modelica.Blocks.Sources.ConstantQRefPu
Modelica.Blocks.Sources.ConstantomegaRefPu
Modelica.Blocks.Sources.ConstantURefPu
Modelica.Blocks.Sources.ConstantPFaRef
Modelica.Blocks.Sources.ConstantPmRefPu
Modelica.ComplexBlocks.Sources.ComplexConstantcomplexConst
Modelica.Blocks.Sources.Constantconst
Dynawo.Electrical.Wind.WECC.WTGCurrentSource_INITwtgCurrentSource_INIT