modelBatt1Conn
Extends from Batt1 (Battery model based on one R-C block in its electric circuit).
Information
Similar to Batt1, but with expandable connector. Output signals:
- state-of-charge "batSOC"
- outputted power "batPowDel".
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Cell data | |||
| Modelica.Units.SI.ElectricCharge | QCellNom (from Batt1) | 10*3600.0 | Nominal electric charge |
| Modelica.Units.SI.Voltage | ECellMin (from Batt1) | 3.3 | Minimum open source voltage |
| Modelica.Units.SI.Voltage | ECellMax (from Batt1) | 4.15 | Maximum open source voltage |
| Modelica.Units.SI.Current | ICellMax (from Batt1) | 10*QCellNom/3600.0 | Maximum admissible current |
| SOC parameters | |||
| Real | SOCMin (from Batt1) | 0 | Minimum state of charge |
| Real | SOCMax (from Batt1) | 1 | Maximum state of charge |
| Real | SOCInit (from Batt1) | 0.5 | Initial state of charge |
| Cell data › Electric circuit parameters | |||
| Modelica.Units.SI.Resistance | R0Cell (from Batt1) | 0.05*ECellMax/ICellMax | Serial resistance "R0" |
| Modelica.Units.SI.Resistance | R1Cell (from Batt1) | R0Cell | Serial resistance "R1" |
| Modelica.Units.SI.Capacitance | C1Cell (from Batt1) | 60/R1Cell | Capacitance in parallel with R1 |
| Parameters related to losses | |||
| Real | efficiency (from Batt1) | 0.85 | Charging/discharging energy efficiency |
| Modelica.Units.SI.Current | iCellEfficiency (from Batt1) | 0.5*ICellMax | Charging/discharging current the efficiency refers to |
| Battery pack data › Size of the package | |||
| Integer | ns (from Batt1) | 1 | Number of serial connected cells per string |
| Integer | np (from Batt1) | 1 | Number of parallel connected strings |