modelIdealCurrentControlledConverter
Ideal current controlled DC/DC converter
Information
This is an ideal DC/DC converter.
- side 1 must be connected with voltage source
- side 2 must be connected with load
Signal input i2 is the current flowing into the positive pin of side 2.
In order to operate side 2 as a load the signal input current i2 must be negative.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Time | T | 1E-6 | Internal integtration time constant |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Electrical.Analog.Interfaces.PositivePin | dc_p1 | Positive DC input | |
| Modelica.Electrical.Analog.Interfaces.NegativePin | dc_n1 | Negative DC input | |
| Modelica.Electrical.Analog.Interfaces.PositivePin | dc_p2 | Positive DC output | |
| Modelica.Electrical.Analog.Interfaces.NegativePin | dc_n2 | Negative DC output | |
| Modelica.Blocks.Interfaces.RealInput | i2 | Current input i2 |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Voltage | v1 | dc_p1.v - dc_n1.v | Voltage of pins 1 |
| Modelica.Units.SI.Voltage | v2 | dc_p2.v - dc_n2.v | Voltage of pins 2 |
| Modelica.Units.SI.Current | i1 | dc_p1.i | Current pins 1 |
| Modelica.Units.SI.Power | p1 | v1*i1 | Power of pins 1 |
| Modelica.Units.SI.Power | p2 | v2*i2 | Power of pins 2 |
| Modelica.Electrical.Analog.Sources.SignalCurrent | signalVoltage | ||
| Modelica.Electrical.Analog.Sensors.VoltageSensor | voltageSensor | ||
| Modelica.Blocks.Math.Product | product | ||
| Modelica.Electrical.Analog.Sensors.PowerSensor | powerSensor | ||
| Modelica.Blocks.Continuous.Integrator | integrator | ||
| Modelica.Blocks.Math.Feedback | feedback | ||
| Modelica.Blocks.Math.Gain | inverse | ||
| Modelica.Electrical.Analog.Sources.SignalCurrent | signalCurrent |