.FMITest.Initialization.LinearSystems.SimpleParameter

Information

With this test model the following properties are tested:

• Defining an FMU with incomplete initialization (so this FMU can only be simulated if additional initialization conditions are defined in the environment where the FMU is imported).
• In the environment one instance is defined with steady-state and state initialization. The value of parameter gain shall be determined so that the initialization conditions are fulfilled.
• This FMU leads to a linear algebraic equation over the FMU during initialization.

Contents

Name	Description
WithFMUsReference	Reference solution in pure Modelica using exactly the same structuring as in Model WithFMUs
WithFMUs	Solution with FMUs
FMUModels	For all models in this package an FMU must be generated