.FuelCellLib.casestudies.FC2Layer

Information

FC2Layer-Casestudies

This case study is formed by two layers fuel cell, Membrane layer and active layer, ( "act_layer" and "mem_layer" in "Layers1D" package), the terminals ("col_cat" and "col_mem" in "Basics" package) and a constant standard Modelica resistance.

The value of standard Modelica resistance could be defined for a "pol_curve_FC2.mos" to simulate a polarization curve.
Before to simulate the polarization curve is necessary to translate the FuelCellLib.casestudies.FC2Layer.
The results are on a "polarization" archives in the "casestudies" folder. The resistance can be substituted by another electric load as standard Modelica class or one of "Basic"--->"Loads" classes for a dynamic studies of the FC2Layer.

On FC2Layer is necessary to define two main parameters:
"Eref": Theorical thermodynamic open circuit voltage and
"pH2": Hydrogen pressure in anode, to define the electro-chenical thermodynamic open circuit (see col_cat class).

Parameters

Name	Default	Description
T	340	Operation temperature of the FC [K]
Eref	1.1	Theorical thermodynamic open circuit voltage [V]
pH2	100000	Hydrogen pressure in anode [Pa]

References

Modelica Association, Modelica-A Unified Object-Oriented Languaje for Physical System Modeling, Tutorial. http://www.modelica.org/.

A.Urquia, S.Dormido, Mathematical and Computer Modelling of Dynamical Systems, vol.9, n?1, pp.65-90, (2002).

K.J.Astrom, H.Elmqvist, S.E.Mattsson, Evolution of continous-time modeling and simulation, The 12th ESM?98, (1998).

M.Ceraolo, C.Miulli, A.Pozio, Modeling static and dynamic behaviour of PEMFC on the basis of electro-chemical description, J. Power Sources 113 (2003).

A.Kumar, R.Reddy, Effect of channel dimensions and shapes in the flow-field distributor on performance of PEMFC, J. Power Sources 113 (2003).

W.D.Steinmann, P.Treffinger, Simulation of Fuel Cell Powered Drive Trains, Modelica WorkShop 2000 Procedings.

D.Bevers, M.W?hr, K.Yasuda, K.Oguro, Simulation of polymer electrolyte fuel cell electrode.J.Appl. Electrochem.27 (1997).

K.Broka, P.Ekdunge, Modelling the PEM fuel cell cathode, J.Appl. Electrochem.27 (1997).

J.Larminie, A.Dicks, Fuel Cell Systems Explained, Wiley 2000.

A.A.Kulikovsky, Fuel Cells 2001,1(2).

V.Gurau, H.Liu, S.Kakac,AIChE J.2000 46(10).

D.M.Bernardi, M.W.Verbrugge, J. electrochem. Soc. 139,9 (1992).

T.E.Springer, T.A.Zawodzinsky, J.Electrochem.Soc. 138 (1991).

S.Dutta, S.Shimpalee, J.Appl.Electrochem. (2000), 30(2).

D.B.Genevey, Thesis, F.V.P.I. (2001).

J. Larminie, A.Dicks, Fuel Cell System Explained, Wiley (2000).