modelPartialHeatTransferZones_IdealFluid

A partial heat transfer model with one ideal nominal HTC for all zones
Diagram of PartialHeatTransferZones_IdealFluidOpen the diagram

Extends from Greenhouses.Flows.FluidFlow.HeatTransfer.BaseClasses.PartialHeatTransfer_IdealFluid.

Information

The partial model PartialHeatTransferZones_IdealFluid extends the partial model PartialHeatTransfer_IdealFluid and defines some inputs, that are needed to compute the convective heat transfer coefficient for an ideal fluid flow:

  • Mdotnom = Nominal mass flow rate
  • T_fluid = Temperature of the fluid
  • Unom = Nominal heat transfer coefficient
  • M_dot = Mass flow circulating in the pipe

Parameters

TypeNameDefaultDescription
Integern (from PartialHeatTransfer_IdealFluid)1Number of heat transfer segments

Connectors

TypeNameDefaultDescription
Greenhouses.Interfaces.Heat.ThermalPortLthermalPortL (from PartialHeatTransfer_IdealFluid)

Components

TypeNameDefaultDescription
Modelica.Units.SI.HeatFluxq_dot (from PartialHeatTransfer_IdealFluid)Heat flux
Modelica.Units.SI.MassFlowRateMdotnomNomnial Mass flow rate
Modelica.Units.SI.CoefficientOfHeatTransferUnomNominal heat transfer coefficient liquid side
Modelica.Units.SI.MassFlowRateM_dotInlet massflow
Modelica.Units.SI.TemperatureT_fluidTemperature of the fluid