.IBPSA.Fluid.BaseClasses.FlowModels.basicFlowFunction_dp_der

Information

Function that implements the first order derivative of IBPSA.Fluid.BaseClasses.FlowModels.basicFlowFunction_dp with respect to the mass flow rate.

Interface

function basicFlowFunction_dp_der
  extends Modelica.Icons.Function;
  input Modelica.SIunits.PressureDifference dp(displayUnit = "Pa") "Pressure difference between port_a and port_b (= port_a.p - port_b.p)";
  input Real k(min = 0, unit = "") "Flow coefficient, k=m_flow/sqrt(dp), with unit=(kg.m)^(1/2)";
  input Modelica.SIunits.MassFlowRate m_flow_turbulent(min = 0) "Mass flow rate where transition to turbulent flow occurs";
  input Real dp_der "Derivative of pressure difference between port_a and port_b (= port_a.p - port_b.p)";
  output Real m_flow_der(unit = "kg/s2") "Derivative of mass flow rate in design flow direction";
end basicFlowFunction_dp_der;

Revisions

• May 1, 2017, by Filip Jorissen:
  Revised implementation such that IBPSA.Fluid.BaseClasses.FlowModels.basicFlowFunction_dp is C2 continuous. See #725.
• April 14, 2017, by Filip Jorissen:
  Changed implementation such that it cannot lead to square roots of negative numbers and reduced the number of required operations. This is for #723.
• January 22, 2016, by Michael Wetter:
  Corrected type declaration of pressure difference. This is for #404.
• July 29, 2015, by Michael Wetter:
  First implementation to avoid in Dymola 2016 the warning "Differentiating ... under the assumption that it is continuous at switching".