.IBPSA.Fluid.HeatPumps.Validation

Information

This package contains models that validate the heat pump models. The examples plot various outputs, which have been verified against analytical solutions. These model outputs are stored as reference data to allow continuous validation whenever models in the library change.

Contents

NameDescription
 Carnot_TCon_LimitedCapacityTest model for Carnot_TCon with limited heating capacity
 Carnot_TCon_LowTemperatureTest model for Carnot_TCon with low condenser leaving water temperature
 Carnot_TCon_etaPLTest model for the part load efficiency curve with condenser leaving temperature as input signal
 Carnot_TCon_reverseFlowTest model for heat pump based on Carnot efficiency and condenser outlet temperature control signal
 Carnot_y_etaCarTest model for heat pump based on Carnot efficiency with etaCar as parameter
 Carnot_y_etaPLTest model for the part load efficiency curve with compressor speed as input signal
 ReciprocatingWaterToWater_DynamicTest model for variable speed reciprocating water to water heat pump
 ReciprocatingWaterToWater_ScalingFactorTest model for variable speed reciprocating water to water heat pump
 ReciprocatingWaterToWater_StaticTest model for static, reciprocating water to water heat pump
 ReciprocatingWaterToWater_VariableSpeedTest model for reciprocating water to water heat pump
 ScrollWaterToWater_DynamicTest model for scroll water to water heat pump
 ScrollWaterToWater_ScalingFactorTest model for scroll water to water heat pump
 ScrollWaterToWater_StaticTest model for static scroll water to water heat pump
 ScrollWaterToWater_TemperatureProtectionTest model for temperature protection of scroll water to water heat pump
 ScrollWaterToWater_VariableSpeedTest model for scroll water to water heat pump

Generated at 2024-12-23T19:25:42Z by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos