.IBPSA.Fluid.Interfaces

Information

This package contains basic classes that are used to build component models that change the state of the fluid. The classes are not directly usable, but can be extended when building a new model.

Contents

Name	Description
UsersGuide	User's Guide
ConservationEquation	Lumped volume with mass and energy balance
EightPort	Partial model with eight ports
EightPortHeatMassExchanger	Model transporting four fluid streams between eight ports with storing mass or energy
FourPortHeatMassExchanger	Model transporting two fluid streams between four ports with storing mass or energy
PartialEightPortInterface	Partial model transporting fluid between eight ports without storing mass or energy
PartialFourPort	Partial model with four ports
PartialFourPortInterface	Partial model transporting fluid between two ports without storing mass or energy
PartialFourPortParallel	Partial model with four ports for components with parallel flow
PartialTwoPort	Partial component with two ports
PartialTwoPortInterface	Partial model transporting fluid between two ports without storing mass or energy
PartialTwoPortTransport	Partial element transporting fluid between two ports without storage of mass or energy
PartialTwoPortVector	Partial component with two ports, one of which being vectorized
PrescribedOutlet	Component that assigns the outlet fluid property at port_a based on an input signal
StaticFourPortHeatMassExchanger	Partial model transporting two fluid streams between four ports without storing mass or energy
StaticTwoPortConservationEquation	Partial model for static energy and mass conservation equations
StaticTwoPortHeatMassExchanger	Partial model transporting fluid between two ports without storing mass or energy
TwoPortHeatMassExchanger	Partial model transporting one fluid stream with storing mass or energy
EightPortFlowResistanceParameters	Parameters for flow resistance for models with height ports
FourPortFlowResistanceParameters	Parameters for flow resistance for models with four ports
LumpedVolumeDeclarations	Declarations for lumped volumes
TwoPortFlowResistanceParameters	Parameters for flow resistance for models with two ports
Examples	Collection of models that illustrate model use and test models