modelLighting
Computes heat gains due to lighting requirements
Extends from IDEAS.Buildings.Components.InternalGains.BaseClasses.PartialLightingGains (Partial model for lighting internal gains).
Information
This lighting model uses a light control input signal, which should have a value between 0 and 1, which is multiplied by the lighting requirements of the zone (lx=lm/m2), the floor area (m2) and the inverse of the luminous efficacy (lm/W). The total lighting gains are then split into a radiative and a convective part.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| IDEAS.Buildings.Components.LightingType.None | ligTyp (from PartialLightingGains) | ||
| IDEAS.Buildings.Components.RoomType.Generic | rooTyp (from PartialLightingGains) | ||
| Modelica.Units.SI.Area | A (from PartialLightingGains) | Area of the zone |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a | portCon (from PartialLightingGains) | Port for convective sensible heat transfer due to occupants | |
| Modelica.Blocks.Interfaces.RealInput | ctrl (from PartialLightingGains) | Number of occupants | |
| Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a | portRad (from PartialLightingGains) | Port for radiative sensible heat transfer due to occupants |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| IDEAS.BoundaryConditions.SimInfoManager | sim (from PartialLightingGains) | Simulation information manager | |
| Modelica.Thermal.HeatTransfer.Sources.PrescribedHeatFlow | preHeaFlo (from PartialLightingGains) | Prescribed energy heat flow for conservation of energy check | |
| Modelica.Blocks.Sources.RealExpression | Qgai (from PartialLightingGains) | ||
| Modelica.Blocks.Math.Gain | gaiHea | Gain for computing heat lighting gains based on zone lighting requirements |
Revisions
-
September 26, 2018 by Iago Cupeiro:
First implementation See #879.