| String | filNam (from PartialSimInfoManager) | Modelica.Utilities.Files.loadResource("modelica://IDEAS/Resources/weatherdata/BEL_VLG_Uccle.064470_TMYx.2007-2021.mos") | File name of TMY3 weather file |
| Modelica.Units.SI.Time | timZon (from PartialSimInfoManager) | weaDat.timZon | Time zone for which the simulation time t=0 corresponds to midnight, january 1st |
| Modelica.Units.SI.Angle[5] | aziOpts (from PartialSimInfoManager) | {incS, incW, incN, incE, incS} | Inclination options, default south |
| Modelica.Units.SI.Angle[4] | incOpts (from PartialSimInfoManager) | {IDEAS.Types.Tilt.Wall, IDEAS.Types.Tilt.Floor, IDEAS.Types.Tilt.Ceiling, IDEAS.Types.Tilt.Wall} | Azimuth options, default wall |
| Boolean | use_port_1 (from PartialSimInfoManager) | interZonalAirFlowType <> IDEAS.BoundaryConditions.Types.InterZonalAirFlow.None | Whether port_1 of the propsbus connector should be used |
| Boolean | use_port_2 (from PartialSimInfoManager) | interZonalAirFlowType == IDEAS.BoundaryConditions.Types.InterZonalAirFlow.TwoPorts | Whether port_2 of the propsbus connector should be used |
| Modelica.Units.SI.Temperature | Tenv_nom (from PartialSimInfoManager) | 280 | Nominal ambient temperature, only used when linearising equations |
| Integer | numIncAndAziInBus (from PartialSimInfoManager) | size(incAndAziInBus, 1) | Number of pre-computed azimuth |
| Modelica.Units.SI.Temperature | Tdes (from PartialSimInfoManager) | -8 + 273.15 | design outdoor temperature |
| Modelica.Units.SI.Temperature | TdesGround (from PartialSimInfoManager) | 10 + 273.15 | design ground temperature |
| Real | V50_def (from PartialSimInfoManager) | V50 - V50_custom | Corrected V50 value, default for surfaces without custom assignment. |
| Real | V50 (from PartialSimInfoManager) | V_tot*n50 | V50 value assuming no custom v50 values. |
| Real | q50_def (from PartialSimInfoManager) | if A_def < Modelica.Constants.small then q50_av else V50_def/A_def | |
| Real | q50_av (from PartialSimInfoManager) | if A_tot < Modelica.Constants.small then 0 else V50/A_tot | average, not corrected q50 |
| Modelica.Units.SI.Volume | V_tot (from PartialSimInfoManager) | | Total conditioned building volume |
| Modelica.Units.SI.Area | A_tot (from PartialSimInfoManager) | | Total surface area of OuterWalls and Windows |
| Real | V50_custom (from PartialSimInfoManager) | | Sum of v50 values for components that have a custom assignment |
| Modelica.Units.SI.Area | A_def (from PartialSimInfoManager) | | Total area with default q50, i.e. without custom q50 assignment, or connected to zone with custom n50 assigned |
| Modelica.Units.SI.Temperature | TDryBulFixed | 293.15 | Dry bulb temperature (used if TDryBul=Parameter) |
| Advanced |
| Modelica.Units.SI.Angle | lat (from PartialSimInfoManager) | weaDat.lat | Latitude of the location |
| Modelica.Units.SI.Angle | lon (from PartialSimInfoManager) | weaDat.lon | Longitude of the location |
| Incidence angles |
| Modelica.Units.SI.Angle | incS (from PartialSimInfoManager) | IDEAS.Types.Azimuth.S | South inclination |
| Modelica.Units.SI.Angle | incW (from PartialSimInfoManager) | incS + Modelica.Constants.pi/2 | West inclination |
| Modelica.Units.SI.Angle | incN (from PartialSimInfoManager) | incS + Modelica.Constants.pi | North inclination |
| Modelica.Units.SI.Angle | incE (from PartialSimInfoManager) | incS + 3*Modelica.Constants.pi/2 | East inclination |
| Modelica.Units.SI.Angle[:,:] | incAndAziInBus (from PartialSimInfoManager) | {{IDEAS.Types.Tilt.Ceiling, 0}, {IDEAS.Types.Tilt.Wall, incS}, {IDEAS.Types.Tilt.Wall, incW}, {IDEAS.Types.Tilt.Wall, incN}, {IDEAS.Types.Tilt.Wall, incE}, {IDEAS.Types.Tilt.Floor, 0}} | Combination of inclination and azimuth which are pre-computed and added to solBus. |
| Conservation of energy |
| Boolean | computeConservationOfEnergy (from PartialSimInfoManager) | false | Add equations for verifying conservation of energy |
| Boolean | strictConservationOfEnergy (from PartialSimInfoManager) | false | This adds an assert statement to make sure that energy is conserved |
| Boolean | openSystemConservationOfEnergy (from PartialSimInfoManager) | false | Compute conservation of energy for open system |
| Modelica.Units.SI.Energy | Emax (from PartialSimInfoManager) | 1 | Error bound for violation of conservation of energy |
| Linearisation |
| Boolean | lineariseDymola (from PartialSimInfoManager) | false | Linearises building model equations for Dymola linearisation approach |
| Boolean | lineariseJModelica (from PartialSimInfoManager) | false | Linearises building model equations for optimisations in JModelica |
| Boolean | createOutputs (from PartialSimInfoManager) | false | Creates output connections when linearising windows |
| Boolean | outputAngles (from PartialSimInfoManager) | not lineariseDymola | Output angles in weaBus. Set to false when linearising |
| Integer | nWindow (from PartialSimInfoManager) | 1 | Number of windows in the to be linearised model |
| Integer | nLayWin (from PartialSimInfoManager) | 3 | Number of window layers in the to be linearised model; should be maximum of all windows |
| Boolean | linearise (from PartialSimInfoManager) | lineariseDymola or lineariseJModelica | Linearises building model equations |
| Linearisation › Convection |
| Boolean | linIntCon (from PartialSimInfoManager) | false | = true, if interior convective heat transfer should be linearised |
| Boolean | linExtCon (from PartialSimInfoManager) | false | = true, if exterior convective heat transfer should be linearised (uses average wind speed) |
| Linearisation › Radiation |
| Boolean | linIntRad (from PartialSimInfoManager) | true | = true, if interior radiative heat transfer should be linearised |
| Advanced › CO2 |
| Real | ppmCO2 (from PartialSimInfoManager) | 400 | Default CO2 concentration in [ppm] when using air medium containing CO2 |
| Interzonal airflow |
| IDEAS.BoundaryConditions.Types.InterZonalAirFlow | interZonalAirFlowType (from PartialSimInfoManager) | IDEAS.BoundaryConditions.Types.InterZonalAirFlow.None | Type of interzonal air flow model |
| Boolean | unify_n50 (from PartialSimInfoManager) | false | if true, zone n50 values are merged and then redistributed across al zones even if interZonalAirFlowType==None |
| Real | n50 (from PartialSimInfoManager) | 3 | n50 value of zones |
| Wind |
| Boolean | use_sim_Cs (from PartialSimInfoManager) | true | if checked, the default Cs of each surface in the building is sim.Cs |
| IDEAS.BoundaryConditions.Types.LocalTerrain | locTer (from PartialSimInfoManager) | IDEAS.BoundaryConditions.Types.LocalTerrain.Unshielded | Selection of local terrain |
| Real | a_custom (from PartialSimInfoManager) | 0.14 | Custom velocity profile exponent |
| Real | A0_custom (from PartialSimInfoManager) | 1.0 | Custom local terrain coefficient |
| Real | a (from PartialSimInfoManager) | if locTer == IDEAS.BoundaryConditions.Types.LocalTerrain.Unshielded then 0.14 elseif locTer == IDEAS.BoundaryConditions.Types.LocalTerrain.Suburban then 0.22
elseif locTer == IDEAS.BoundaryConditions.Types.LocalTerrain.Urban then 0.33 else a_custom | Velocity profile exponent |
| Modelica.Units.SI.Length | delta (from PartialSimInfoManager) | if locTer == IDEAS.BoundaryConditions.Types.LocalTerrain.Unshielded then 270 elseif locTer == IDEAS.BoundaryConditions.Types.LocalTerrain.Suburban then 370
elseif locTer == IDEAS.BoundaryConditions.Types.LocalTerrain.Urban then 460 else 0 | Wind boundary layer thickness |
| Real | A0 (from PartialSimInfoManager) | if locTer == IDEAS.BoundaryConditions.Types.LocalTerrain.Custom then A0_custom else (270/Hwind)^0.14*(Hwind/delta)^a | Local terrain coefficient |
| Modelica.Units.SI.Length | H (from PartialSimInfoManager) | 10 | Building or roof height |
| Modelica.Units.SI.Length | Hwind (from PartialSimInfoManager) | 10 | Height above ground of meteorological wind speed measurement |
| Modelica.Units.SI.Length | HPres (from PartialSimInfoManager) | 1 | Height above ground of meteorological atmospheric pressure measurement |
| Real | Cs_coeff (from PartialSimInfoManager) | (A0*A0)*((1/Hwind)^(2*a)) | Multiplication factor for wind speed modifier Cs |
| Real | Cs (from PartialSimInfoManager) | Cs_coeff*(H^(2*a)) | Wind speed modifier |
