modelNone
None
Extends from IDEAS.Templates.Interfaces.BaseClasses.Occupant.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nZones (from PartialSystem) | Number of conditioned thermal zones in the building | |
| Integer | nLoads (from PartialSystem) | 0 | Number of electric loads. If zero, all electric equations disappear. |
| Integer | id (from Occupant) | 1 | id-number on extern data references |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Electrical.QuasiStatic.Polyphase.Interfaces.PositivePlug | plugLoad (from PartialSystem) | Electricity connection to the Inhome feeder | |
| Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a | heatPortCon (from Occupant) | Nodes for convective heat gains | |
| Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a | heatPortRad (from Occupant) | Nodes for radiative heat gains | |
| Modelica.Blocks.Interfaces.RealOutput | TSet (from Occupant) | Setpoint temperature for the zones | |
| Modelica.Blocks.Interfaces.RealOutput | mDHW60C (from Occupant) | mFlow for domestic hot water, at 60 degC |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| IDEAS.BoundaryConditions.SimInfoManager | sim (from PartialSystem) | Simulation information manager for climate data | |
| IDEAS.Experimental.Electric.BaseClasses.AC.WattsLawPlug | wattsLawPlug (from PartialSystem) |
Revisions
-
July 25, 2018 by Filip Jorissen:
Fixed bug in assignment ofPandQ. This is for #869.