modelCase650FF
Extends from IDEAS.Buildings.Validation.Cases.Case650.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | standAlone (from Building) | true | |
| Modelica.Units.SI.Temperature | T_start (from Building) | 293.15 | Operative zonal start temperatures |
| Modelica.Units.SI.Power | Q_design (from Building) | building.Q_design + ventilationSystem.Q_design | Total design heat load for heating system based on heat losses |
| Boolean | InInterface (from Building) | true |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Electrical.QuasiStatic.SinglePhase.Interfaces.PositivePin | plugFeeder (from Building) | Electricity connection to the district feeder | |
| Modelica.Fluid.Interfaces.FluidPort_a | port_a (from Building) | ||
| Modelica.Fluid.Interfaces.FluidPort_b | port_b (from Building) |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.Power | PHea (from BesTestCase) | min(heatingSystem.heatPortCon[1].Q_flow, 0) | |
| Modelica.Units.SI.Power | PCoo (from BesTestCase) | max(heatingSystem.heatPortCon[1].Q_flow, 0) | |
| Modelica.Units.SI.Temperature | TAir (from BesTestCase) | Modelica.Units.Conversions.to_degC(building.heatPortCon[1].T) | |
| IDEAS.BoundaryConditions.SimInfoManager | sim (from Building) | ||
| IDEAS.Templates.Interfaces.BaseClasses.Structure | building (from Building) | ||
| IDEAS.Templates.Interfaces.BaseClasses.HeatingSystem | heatingSystem (from Building) | ||
| IDEAS.Templates.Interfaces.BaseClasses.Occupant | occupant (from Building) | ||
| IDEAS.Templates.Interfaces.BaseClasses.CausalInhomeFeeder | inHomeGrid (from Building) | ||
| IDEAS.Templates.Interfaces.BaseClasses.VentilationSystem | ventilationSystem (from Building) | ||
| Modelica.Electrical.QuasiStatic.SinglePhase.Sources.VoltageSource | voltageSource (from Building) | ||
| Modelica.Electrical.QuasiStatic.SinglePhase.Basic.Ground | ground (from Building) |