modelIdealSource
Extends from IDEAS.Fluid.Movers.BaseClasses.IdealSource (Base class for pressure and mass flow source with optional power input).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Boolean | control_m_flow (from IdealSource) | if true, then the mass flow rate is equal to the value of m_flow_in | |
| Boolean | control_dp (from IdealSource) | not control_m_flow | if true, then the head is equal to the value of dp_in |
| Assumptions | |||
| Boolean | allowFlowReversal (from PartialTwoPort) | true | = false to simplify equations, assuming, but not enforcing, no flow reversal |
| Advanced | |||
| Modelica.Units.SI.PressureDifference | dp_start (from PartialTwoPortTransport) | 0 | Guess value of dp = port_a.p - port_b.p |
| Medium.MassFlowRate | m_flow_start (from PartialTwoPortTransport) | 0 | Guess value of m_flow = port_a.m_flow |
| Medium.MassFlowRate | m_flow_small (from PartialTwoPortTransport) | Small mass flow rate for regularization of zero flow | |
| Advanced › Diagnostics | |||
| Boolean | show_T (from PartialTwoPortTransport) | true | = true, if temperatures at port_a and port_b are computed |
| Boolean | show_V_flow (from PartialTwoPortTransport) | true | = true, if volume flow rate at inflowing port is computed |
| Nominal condition | |||
| Modelica.Units.SI.MassFlowRate | m_flow_nominal | Nominal mass flow rate | |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Fluid.Interfaces.FluidPort_a | port_a (from PartialTwoPort) | Fluid connector a (positive design flow direction is from port_a to port_b) | |
| Modelica.Fluid.Interfaces.FluidPort_b | port_b (from PartialTwoPort) | Fluid connector b (positive design flow direction is from port_a to port_b) | |
| Modelica.Blocks.Interfaces.RealInput | m_flow_in (from IdealSource) | Prescribed mass flow rate | |
| Modelica.Blocks.Interfaces.RealInput | dp_in (from IdealSource) | Prescribed pressure difference port_a.p-port_b.p |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Medium.MassFlowRate | m_flow (from PartialTwoPortTransport) | Mass flow rate in design flow direction | |
| Modelica.Units.SI.PressureDifference | dp (from PartialTwoPortTransport) | Pressure difference between port_a and port_b (= port_a.p - port_b.p) | |
| Modelica.Units.SI.VolumeFlowRate | V_flow (from PartialTwoPortTransport) | m_flow/Modelica.Fluid.Utilities.regStep(m_flow, Medium.density(Medium.setState_phX(p = port_a.p, h = inStream(port_a.h_outflow), X = inStream(port_a.Xi_outflow))), Medium.density(Medium.setState_phX(p = port_b.p, h = inStream(port_b.h_outflow), X = inStream(port_b.Xi_outflow))), m_flow_small) | Volume flow rate at inflowing port (positive when flow from port_a to port_b) |
| Medium.Temperature | port_a_T (from PartialTwoPortTransport) | Modelica.Fluid.Utilities.regStep(port_a.m_flow, Medium.temperature(Medium.setState_phX(p = port_a.p, h = inStream(port_a.h_outflow), X = inStream(port_a.Xi_outflow))), Medium.temperature(Medium.setState_phX(port_a.p, port_a.h_outflow, port_a.Xi_outflow)), m_flow_small) | Temperature close to port_a, if show_T = true |
| Medium.Temperature | port_b_T (from PartialTwoPortTransport) | Modelica.Fluid.Utilities.regStep(port_b.m_flow, Medium.temperature(Medium.setState_phX(p = port_b.p, h = inStream(port_b.h_outflow), X = inStream(port_b.Xi_outflow))), Medium.temperature(Medium.setState_phX(port_b.p, port_b.h_outflow, port_b.Xi_outflow)), m_flow_small) | Temperature close to port_b, if show_T = true |
| Medium.ThermodynamicState | sta_a | Medium.setState_phX(port_a.p, noEvent(actualStream(port_a.h_outflow)), noEvent(actualStream(port_a.Xi_outflow))) | Medium properties in port_a |
| Medium.ThermodynamicState | sta_b | Medium.setState_phX(port_b.p, noEvent(actualStream(port_b.h_outflow)), noEvent(actualStream(port_b.Xi_outflow))) | Medium properties in port_b |