modelHeatPump_AirWater
General example and tester for a modulating air-to-water heat pump
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
This example shows the modulation behaviour of an inverter controlled air-to-water heat pump when the inlet water temperature is changed.
The modulation level can be seen from heater.heatSource.modulation.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.MassFlowRate | m_flow_nominal | 0.2 | Nominal mass flow rate |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| IDEAS.Fluid.Movers.FlowControlled_m_flow | pump | ||
| HP_AirWater_TSet | heater | ||
| Modelica.Thermal.HeatTransfer.Sources.FixedTemperature | fixedTemperature | ||
| Modelica.Thermal.HeatTransfer.Sources.PrescribedTemperature | TReturn | ||
| Modelica.Blocks.Sources.Sine | sine | ||
| Sources.Boundary_pT | bou | ||
| BoundaryConditions.SimInfoManager | sim | ||
| Modelica.Blocks.Sources.Constant | Tset | Temperature set point |
Contents
| Name | Description |
|---|---|
 Medium |
Revisions
-
October 30, 2024, by Lucas Verleyen:
Updates according to IBPSA.
See #1383 (and IBPSA, #1926). -
June 5, 2018 by Filip Jorissen:
Cleaned up implementation for #821. - March 2014 by Filip Jorissen:
Annex60 compatibility