modelModulationSecurity
Non physical down modulation of the power of a heat production when the fluid temperature approach its boundaries temperature
in order to reduce the number of events
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.TemperatureDifference | deltaT_security | if use_modulation_security then 1 else 5 | Temperature difference from the boundary at which the security hysteresis will be released |
| Modelica.Units.SI.Temperature | T_max | 373.15 | Maximum fluid temperature |
| Modelica.Units.SI.Temperature | T_min | 273.15 | Minimum fluid temperature |
| Advanced › Events | |||
| Boolean | use_modulation_security | false | Set to true if power modulation should be used to avoid exceeding temperature. |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealOutput | modulation_security | IDEAS.Utilities.Math.Functions.spliceFunction(x = min(limLow.y, limUp.y)/max(Modelica.Constants.eps, deltaT_security) - 1, pos = 1, neg = 0, deltax = 0.5) | Modulation to avoid reaching temperature boundaries |